本文關鍵詞：液壓破碎錘關鍵技術研究　出處：《浙江大學》2012年碩士論文　論文類型：學位論文

  更多相關文章： 液壓沖擊 氣液聯合作用 破碎錘 AMESim 建模 仿真 沖擊性能測試 試驗

【摘要】：液壓破碎錘問世半個世紀以來,由于具有沖擊能量大,適應能力強,可靠性和效率高、節能環保等優點,越來越受到國內外相關專家和工程技術人員的重視。目前已廣泛應用在采礦、冶金、道路建設、市政工程、建筑及船舶工業等行業。我國社會工業化步伐的加快對工程機械的需求將越來越大,作為工程機械輔助設備的液壓破碎錘前景廣闊,為了創造更大的社會和經濟效益,有必要研制高質量、高性能的產品。 本文針對氣液聯合作用式液壓破碎錘關鍵技術和破碎錘沖擊性能測試系統為對象展開研究,在綜合國內外文獻資料的基礎上,闡述了液壓破碎錘的國內外研究發展現狀及未來產品發展趨勢；研究分析了氣液聯合作用式液壓破碎錘的結構和原理,對液壓沖擊機構關鍵部件的運動規律采用AMESim軟件的建立了系統的仿真模型,并進行仿真,探討了結構參數和工作參數對液壓破碎錘沖擊性能的影響；提出了測試液壓破碎錘沖擊性能的測試液壓缸的結構,并通過仿真優選了結構參數,完成了測試系統搭建,并對氣液聯合作用式液壓破碎錘沖擊性能進行了實驗測試,得到了實驗結論。 各章內容分別敘述如下： 第一章在綜合分析國內外文獻的基礎上,論文介紹了液壓破碎錘的特點、應用范圍、分類、結構及原理；比較分析了國內外主要類型液壓破碎錘的優缺點、研究發展現狀及未來發展趨勢；闡述了線性和非線性模型兩種研究方法；提出了論文的研究意義及研究?jī)?nèi)容。 第二章闡述了氣液聯合作用式液壓破碎錘的工作過程；對其液壓沖擊機構進行了深入的理論分析,建立了線性數學模型和非線性數學模型；基于應力波傳遞理論對沖擊活塞與釬桿的碰撞原理進行理論分析研究,并建立了數學模型。 第三章基于AMESim軟件,對氣液聯合作用式液壓破碎錘的液壓系統及測試系統進行了計算機建模仿真,探討了關鍵的結構參數及輸入?yún)?shù)對其沖擊性能的影響,提出了測試液壓破碎錘沖擊性能的測試液壓缸的新結構,并通過仿真優選了結構參數,為結構設計和測試系統研究提供了支持。 第四章,比較分析了液壓破碎錘沖擊性能的檢測方法,搭建了氣液聯合作用式液壓破碎錘沖擊性能測試系統,介紹了其組成原理及其性能指標和實驗方法；基于搭建的測試系統對氣液聯合作用式液壓破碎錘沖擊性能進行了測試,得到了實驗結果,并與仿真結果對比,分析了誤差原因,得到了實驗結論,驗證了氣液聯合作用式液壓破碎錘及其基于破碎錘沖擊力測試缸的測試系統的理論分析和仿真模型的正確性,以及測試方案的可行性和測試方法的實用性。 第五章對整個論文的主要研究工作和所得的成果進行了總結概括,并對下一步的研究工作和方向進行了展望。
[Abstract]:Since the invention of hydraulic hammer for half a century, it has the advantages of large impact energy, strong adaptability, high reliability and efficiency, energy saving and environmental protection. At present, it has been widely used in mining, metallurgy, road construction, municipal engineering. Construction industry and shipbuilding industry. With the acceleration of the pace of social industrialization in China, the demand for construction machinery will be greater and greater. As an auxiliary equipment of construction machinery, the hydraulic hammer has a broad prospect. In order to create greater social and economic benefits, it is necessary to develop high-quality, high-performance products. In this paper, the key technology of gas-liquid combined hydraulic hammer and the impact performance test system of the hammer are studied, based on the literature data at home and abroad. The present situation of research and development of hydraulic hammer at home and abroad and the trend of product development in the future are expounded. The structure and principle of gas-liquid combined hydraulic crushing hammer are studied and analyzed. The simulation model of the key components of hydraulic impact mechanism is established by AMESim software, and the simulation is carried out. The influence of structure parameters and working parameters on the impact performance of hydraulic hammer is discussed. The structure of the hydraulic cylinder is proposed to test the impact performance of the hydraulic crushing hammer, and the structure parameters are selected by simulation, and the test system is built. The impact performance of gas-liquid combined hydraulic hammer was tested and the experimental results were obtained. The chapters are described below: The first chapter introduces the characteristics, application range, classification, structure and principle of hydraulic hammer on the basis of comprehensive analysis of domestic and foreign literature. The advantages and disadvantages of the main types of hydraulic hammer at home and abroad are compared and analyzed. Two research methods, linear model and nonlinear model, are described. The significance and content of the thesis are put forward. In the second chapter, the working process of gas-liquid combined hydraulic hammer is described. The hydraulic impact mechanism is analyzed deeply, and the linear mathematical model and the nonlinear mathematical model are established. Based on the stress wave transfer theory, the collision principle of impact piston and drill rod is analyzed theoretically, and the mathematical model is established. In the third chapter, based on AMESim software, the hydraulic system and test system of gas-liquid combined hydraulic hammer are modeled and simulated by computer. This paper discusses the influence of key structural parameters and input parameters on its impact performance, and puts forward a new structure for testing the impact performance of hydraulic crushing hammer, and selects the structural parameters by simulation. It provides support for the research of structure design and test system. In chapter 4th, the testing methods of impact performance of hydraulic hammer are compared and analyzed, and the testing system of impact performance of hydraulic hammer with gas-liquid combined action is set up, and its composition principle, performance index and experimental method are introduced. Based on the test system, the impact performance of gas-liquid combined hydraulic hammer is tested, the experimental results are obtained, and the error reasons are analyzed, and the experimental results are obtained by comparing the experimental results with the simulation results. The correctness of the theoretical analysis and simulation model of the pneumatic hydraulic hammer and its testing system based on the impact force test cylinder of the broken hammer are verified, and the feasibility of the test scheme and the practicability of the test method are also verified. Chapter 5th summarizes the main research work and results of the whole thesis, and looks forward to the next research work and direction.
【學位授予單位】：浙江大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TU631;TH137

【參考文獻】

相關期刊論文 前6條

1 礦機教研室液壓鑿巖機科研組 ,李大詒;有閥型液壓鑿巖機有關問題的探討[J];北京鋼鐵學院學報;1980年03期

2 羅銘;楊襄璧;;液壓錘(沖擊器)的結構特征與技術進步[J];中國工程機械學報;2005年03期

3 司癸卯;張青蘭;段立立;李曉寧;孫恒;;基于AMESim的液壓破碎錘液壓系統建模與仿真[J];中國工程機械學報;2010年02期

4 秦家升 ,游善蘭;AMESim軟件的特征及其應用[J];工程機械;2004年12期

5 劉忠;;液壓沖擊機械工作參數調節方法研究[J];工程機械;2006年08期

6 羅生梅;張宏林;斯建剛;龍?jiān)?;液壓沖擊器配流閥設計方案的研究[J];新技術新工藝;2009年03期

相關博士學位論文 前1條

1 許勤;液壓沖擊器系統性能的測試與分析[D];南京農業大學;2009年

，

本文編號：1375595