本文關鍵詞：切向和法向摩擦振動向量合成方法　出處：《潤滑與密封》2016年10期 　論文類型：期刊論文

  更多相關文章： 摩擦振動 向量合成 磨損狀態 磨合過程

【摘要】：為了實現切向和法向摩振動的融合,提出應用向量理論對切向和法向摩擦振動進行合成的方法,通過摩擦副磨合磨損試驗分析合成摩擦振動的變化規律。結果表明:合成摩擦振動在摩擦副磨合過程中經歷了由大到小并趨于平穩的變化過程;摩擦副磨合開始時,合成摩擦振動的幅值較大,隨著磨合過程的進行,合成摩擦振動的幅值逐漸減小;摩擦副達到磨合后,合成摩擦振動的幅值處于平穩波動;提出的向量合成方法可實現切向和法向摩擦振動的融合,合成的摩擦振動能夠反映摩擦副磨合磨損狀態的變化。
[Abstract]:In order to realize the integration of tangential and normal friction vibration, proposes the application of vector theory of tangential and normal friction vibration synthesis method, through the analysis of friction friction vibration test running in wear patterns. The results show that the synthetic friction friction vibration in the running process experienced from large to small and tend to the change process is stable; the friction pairs start running, synthesis of friction vibration amplitude is larger, with the running in process, the amplitude of vibration friction decreases; the friction reached after the run in a stable amplitude synthetic friction vibration fluctuation; vector synthesis method proposed can achieve the fusion of tangential and normal friction vibration. The synthesis of friction vibration can reflect the friction wear state changes.

【作者單位】： 大連海事大學輪機工程學院;上海海事大學商船學院;大連中遠國際貨運有限公司;
【基金】：國家高技術研究發展計劃項目(863)(2013AA040203) 中央高�；究蒲袠I(yè)務費專項資金項目(3132016343)
【分類號】：TH117
【正文快照】： j縥縥縥磕Σ琳穸悄Σ糧蹦ニ鴯討斜厝徊南窒，

本文編號：1367363