網絡化機載數據采集系統中嵌入式主站軟件的設計與實現
發布時間:2019-06-19 09:01
【摘要】:機載數據采集系統負責對飛行試驗測試數據的采集、傳輸、處理與存儲,是進行飛行測試與試航認證的的關鍵設備。隨著通信網絡技術在航空領域中的廣泛應用,新型飛機、大型飛機的飛行試驗對機載數據采集系統提出了新的要求。網絡化機載數據采集系統在擴展性、實時性、數據傳輸帶寬、數據交換與共享等方面均具有較強的優勢,符合未來飛機的飛行試驗要求。 結合實驗室承擔的科研課題——“基于實時以太網的數據采集系統關鍵技術研究、實現與驗證”,本文重點研究了網絡化機載數據采集系統中嵌入式主站功能模塊劃分、軟件設計與實現。 本文首先對機載數據采集系統的現狀與網絡發展趨勢進行概要介紹,并在對實時以太網EtherCAT詳細分析的基礎上,提出基于EtherCAT的網絡化機載數據采集方案。然后,以嵌入式主站為研究重點,對嵌入式主站進行軟硬件功能劃分,并詳細設計了嵌入式主站軟件模塊。最后,詳細闡述嵌入式主站軟件開發流程,構建片上系統并移植Linux操作系統,并對嵌入式主站的郵箱服務進行編程實現與功能驗證。
[Abstract]:The on-board data acquisition system is responsible for the acquisition, transmission, processing and storage of flight test data, and is the key equipment for carrying out flight test and pilot certification. With the wide application of the communication network technology in the aviation field, the flight test of the new aircraft and the large-scale aircraft has put forward a new requirement for the on-board data acquisition system. The networked airborne data acquisition system has strong advantages in the aspects of expansibility, real-time performance, data transmission bandwidth, data exchange and sharing, and meets the flight test requirements of the future aircraft. In this paper, the function module division, software design and real-time of the embedded main station in the networked airborne data acquisition system are studied in this paper by combining with the scientific research subject _ "Research, Implementation and Verification of Key Technology of Data Acquisition System Based on Real-time Ethernet". In this paper, the present situation of the airborne data acquisition system and the development trend of the network are briefly introduced, and on the basis of the detailed analysis of the real-time Ethernet EtherCAT, the on-board data collection based on the EtherCAT is put forward. And then, the embedded master station is used as the research focus, the software and hardware functions of the embedded main station are divided, and the embedded master station is designed in detail. And finally, the software development process of the embedded main station is described in detail, an on-chip system is built and a Linux operating system is transplanted, and the mailbox service of the embedded master station is programmed to realize and work.
【學位授予單位】:西安電子科技大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TP274.2;TP368.1
本文編號:2502236
[Abstract]:The on-board data acquisition system is responsible for the acquisition, transmission, processing and storage of flight test data, and is the key equipment for carrying out flight test and pilot certification. With the wide application of the communication network technology in the aviation field, the flight test of the new aircraft and the large-scale aircraft has put forward a new requirement for the on-board data acquisition system. The networked airborne data acquisition system has strong advantages in the aspects of expansibility, real-time performance, data transmission bandwidth, data exchange and sharing, and meets the flight test requirements of the future aircraft. In this paper, the function module division, software design and real-time of the embedded main station in the networked airborne data acquisition system are studied in this paper by combining with the scientific research subject _ "Research, Implementation and Verification of Key Technology of Data Acquisition System Based on Real-time Ethernet". In this paper, the present situation of the airborne data acquisition system and the development trend of the network are briefly introduced, and on the basis of the detailed analysis of the real-time Ethernet EtherCAT, the on-board data collection based on the EtherCAT is put forward. And then, the embedded master station is used as the research focus, the software and hardware functions of the embedded main station are divided, and the embedded master station is designed in detail. And finally, the software development process of the embedded main station is described in detail, an on-chip system is built and a Linux operating system is transplanted, and the mailbox service of the embedded master station is programmed to realize and work.
【學位授予單位】:西安電子科技大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TP274.2;TP368.1
【參考文獻】
相關期刊論文 前6條
1 熊華鋼;周貴榮;李峭;;機載總線網絡及其發展[J];航空學報;2006年06期
2 田方正;皇甫大宏;沙永忠;;新一代機載數據采集系統的發展綜述[J];測控技術;2007年03期
3 孫健;霍培鋒;;大型飛機試飛測試現狀與對策[J];測控技術;2007年03期
4 袁炳南;霍朝暉;白效賢;;航空飛行試驗遙測標準概況[J];測控技術;2010年11期
5 張俊民;袁炳南;白效賢;;iNET的技術框架和應用前景[J];測控技術;2010年11期
6 繆學勤;論六種實時以太網的通信協議[J];自動化儀表;2005年04期
,本文編號:2502236
本文鏈接:http://sikaile.net/kejilunwen/jisuanjikexuelunwen/2502236.html
最近更新
教材專著