發布時間：2019-06-09 18:19

【摘要】：觸摸感應技術是一種基于信號識別技術基礎上的新型電子控制技術,作為一種傳統輸入方式的升級換代技術,應用在對各種電子設備的信息輸入和操控上,給輸入設備的人機交互界面帶來了革命性的變化。 觸摸感應技術的基本原理是以捕捉人體手指的觸摸動作信息為基本出發點,將手指觸摸動作的信息轉化成電信號并加以識別。主流的觸摸感應技術主要基于電阻或者電容感應原理,結合現代微電子技術集成電路能夠可靠地捕捉手指的觸摸信息。 本文的主要研究目的是提出一種適合于小空間和翻轉結構的觸摸按鍵的設計應用方法。 在電氣設計方面,對于翻轉結構給觸摸按鍵信號識別所帶來的干擾,通過合理的硬件設計和軟件調試,解決了經常困擾觸摸按鍵設計人員的誤動作問題；對于小空間的設計問題,因其對于PCB的尺寸有較大的限制,將傳統的底部LED背光源,改到按鍵的側面,使用創新的導光片結構設計保證了發光效果。 在結構設計方面,對于極小的空間,通過采用高強度的鋁材同時作為裝飾面板和框架,既實現了觸摸按鍵信號采集對于穩定性的要求,也成功實現了在狹小空間內設計滿足強度要求的翻轉結構。 最后,結合本文設計的特點,給出了該產品設計的測試和評價方法,對于硬件和軟件方面的重點課題也給出了相應解決辦法。
[Abstract]:Touch induction technology is a new type of electronic control technology based on signal recognition technology. as a kind of upgrading technology of traditional input mode, touch induction technology is applied to the information input and control of various electronic devices. It has brought revolutionary changes to the human-computer interface of the input device. The basic principle of touch induction technology is to capture the touch action information of human fingers as the basic starting point, and convert the information of finger touch action into electrical signal and recognize it. The mainstream touch induction technology is mainly based on the principle of resistance or capacitance induction, and the integrated circuit of modern microelectronics technology can reliably capture the touch information of fingers. The main purpose of this paper is to propose a design and application method of touch button suitable for small space and flip structure. In the aspect of electrical design, the interference caused by the flip structure to the recognition of touch button signal is solved by reasonable hardware design and software debugging, which often perplexes the touch button designer. For the design of small space, because of its great limitation on the size of PCB, the traditional bottom LED backlight source is changed to the side of the key, and the innovative light guide structure design is used to ensure the luminous effect. In the aspect of structural design, for very small space, the stability requirement of touch key signal acquisition is realized by using high strength aluminum as decorative panel and frame at the same time. The flip structure which meets the strength requirements is also successfully designed in a narrow space. Finally, according to the characteristics of this design, the test and evaluation method of the product design is given, and the corresponding solutions to the key issues of hardware and software are also given.
【學位授予單位】：大連理工大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP334.2

【參考文獻】

相關期刊論文 前6條

1 魯冰;;電容式觸摸屏系統解決方案[J];電子產品世界;2008年12期

2 何燕冬;楊龍;彭濤;;電容式觸摸感應技術中的電容物理學[J];電子產品世界;2009年08期

3 王秀霞;邵斌;;基于電場傳感器MC33794的觸摸按鍵設計[J];電子設計工程;2009年02期

4 田野;廖明燕;;基于充放電原理的電容式觸摸按鍵設計[J];電子設計工程;2010年10期

5 管瑞;周龍;陳雄;;基于張弛原理的JST080觸摸按鍵的優化設計[J];武漢工業學院學報;2010年04期

6 戴蓉,劉祖林,王春麟,陳麥秀;智能儀器儀表中單片機的抗干擾措施[J];儀表技術與傳感器;1999年12期

相關重要報紙文章 前1條

1 記者 趙艷秋　馮健;[N];中國電子報;2008年

，

本文編號：2495777