【摘要】：文中闡述了基于ARM7和μClinux操作系統的任務應用,給出嵌入式智能終端硬件平臺。說明溫度測量的硬件電路和程序設計,實現了網絡程序設計。描述了WebServer流程圖,通過網頁瀏覽可以看到實時溫度顯示值,網絡接口設計選擇RTL8019AS芯片,設計了基于ARM7處理器的數據采集與存儲功能。說明E2PROM存儲器CAT1025與ARM7處理器的硬件連接電路和軟件流程圖。使用ZLG7290實現了鍵盤管理的人機接口功能,描述了MiniGUI體系結構,實現了虛擬示波器和智能終端的功能。
[Abstract]:This paper describes the task application based on ARM7 and uClinux operating system, and gives the hardware platform of embedded intelligent terminal. The hardware circuit and programming of temperature measurement are described, and the network programming is realized. The flow chart of the WebServer is described. The real-time temperature display value can be seen through the web browsing. The RTL8019AS chip is selected by the network interface design, and the data acquisition and storage function based on the ARM7 processor is designed. Illustrate that hardware connection circuit and software flow diagram of the E2PROM memory CAT1025 and the ARM7 processor. The man-machine interface function of the keyboard management is realized by using the ZLG7290, the MiniGUI architecture is described, and the functions of the virtual oscilloscope and the intelligent terminal are realized.
【作者單位】： 北京信息科技大學自動化學院;
【基金】：2012年北京市自然科學基金項目(4122029)
【分類號】：TP368.12

【參考文獻】

相關期刊論文 前2條

1 劉s，

本文編號：2491916