【摘要】：電子花樣機是采用嵌入式系統技術的新一代智能縫制設備具有縫制速度快，效率高，縫制質量好等優點，目前在箱包縫制行業有著廣泛的應用。本文分析了電子花樣機的工作原理和目前控制系統的基本形式，確定了電子花樣機控制系統的整體設計方案。本控制系統使用了上位機與下位機相結合的架構形式，上位機使用了嵌入式PC主板和LCD觸摸屏，下位機使用了運動控制卡。本文完成了下位運動控制卡的硬軟件設計和花樣圖形處理算法的設計。 本文設計的運動控制卡主要由微處理器STM32F103ZC和專用運動控制芯片PCL6045B組成。在硬件方面，，介紹了電源模塊、串口通信電路、CAN通訊電路、JTAG電路的設計方法。在軟件方面，本文根據模塊化設計方法將程序劃分為一個個功能模塊，詳細介紹了指令接收與解釋模塊、指令執行模塊、狀態檢測模塊等的設計方法，最后介紹了抗干擾措施。 本文設計了一種新的花樣文件存儲格式HGC用于存儲花樣信息，介紹了DXF圖形文件格式轉換為HGC花樣文件格式的方法。最后完成了花樣圖形算法的設計，詳細介紹了直線、圓、人字縫、花樣縮放和花樣旋轉算法的實現。
[Abstract]:Electronic pattern machine is a new generation of intelligent sewing equipment with embedded system technology, which has the advantages of fast sewing speed, high efficiency, good sewing quality and so on. It has been widely used in the sewing industry of luggage and bags at present. In this paper, the working principle of the electronic pattern prototype and the basic form of the current control system are analyzed, and the overall design scheme of the control system of the electronic pattern prototype is determined. This control system uses the architecture of upper computer and lower computer, the upper computer uses embedded PC motherboard and LCD touch screen, and the lower computer uses motion control card. In this paper, the hardware and software design of the lower motion control card and the algorithm of pattern processing are completed. The motion control card designed in this paper is mainly composed of microprocessor STM32F103ZC and special motion control chip PCL6045B. In the aspect of hardware, the design methods of power module, serial communication circuit, CAN communication circuit and JTAG circuit are introduced. In the aspect of software, according to the modular design method, the program is divided into functional modules, and the design methods of instruction receiving and interpreting module, instruction execution module and state detection module are introduced in detail. Finally, the anti-jamming measures are introduced. In this paper, a new pattern file storage format, HGC, is designed to store pattern information. The method of converting DXF graphic file format to HGC pattern file format is introduced. Finally, the design of pattern graph algorithm is completed, and the realization of straight line, circle, herringbone seam, pattern scaling and pattern rotation algorithm is introduced in detail.
【學位授予單位】：中國科學院研究生院（沈陽計算技術研究所）
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP273;TP368.1

【引證文獻】

相關碩士學位論文 前1條

1 章浩;電子花樣機軟件系統的研究與開發[D];南京理工大學;2013年

本文編號：2451273