【摘要】：礦井供電網絡是一個煤礦安全高效生產的動力來源。煤礦的智能化、自動化程度正在不斷地發展和提高，與此同時，這就對礦井的供電系統的安全性、可靠性、連續性提出了越來越嚴格的要求。目前，以微處理器為核心的微機監測與保護系統已經廣泛深入到礦井供配電網的領域，形成高低壓配電監測子系統。但是這些子系統之間是相互獨立的，監控信息也不能共享，，造成煤礦供電系統的運行狀態仍停留在依靠報表逐級上報的被動局面，無法實現電網運行方式改變時供電安全保障。另外，煤礦井下的高壓供電系統是由多段短電纜組成的單電源逐級控制干線式縱向供電網絡。級與級之間的電流速斷保護動作值按照常規方法整定計算，保護裝置經常發生越級跳閘現象。 本課題研制一套礦井電網安全監控網絡化系統，擬應用礦井配電網開關設備微機保護技術、配電網運算CAD及網絡技術對礦井高、低壓電網安全監測設備及子系統的網絡化，使各饋電IED及進線IED進行多級通信和信息共享，為構建基于人工智能的煤礦井下供電網絡的安全保護、監控與預警系統做有益的探索，形成煤礦供電網絡安全保障體系。本系統中，在井下各采區變電所均裝設MCGSTPC7062K嵌入版觸摸屏，各高壓開關柜裝設SNP-2611礦用監控保護裝置。監控保護裝置實時采集各開關柜的運行狀態信息，通過485通信傳送至TPC7062K，并對電力參數進行顯示。TPC7062K嵌入版觸摸屏控制分站通過以太環網將井下信息上傳至地面監控主機。 該課題的實施為消除礦井高壓電網長期存在的因短路故障而引起越級跳閘的安全隱患提供了技術支持。所以該課題的研究對煤礦的安全高效生產有很大的實用價值和重要意義。
[Abstract]:Mine power supply network is a safe and efficient power source for coal mine production. The intelligent and automatic degree of coal mine is developing and improving continuously. At the same time, the security, reliability and continuity of mine power supply system are required more and more strictly. At present, the microcomputer monitoring and protection system with microprocessor as the core has been widely used in the field of mine power supply and distribution network to form a high and low voltage distribution monitoring subsystem. However, these subsystems are independent of each other, monitoring information can not be shared, resulting in the operation of the coal mine power supply system is still in the passive situation of relying on reports to report one by one, and the power supply security can not be guaranteed when the operation mode of the power grid is changed. In addition, the underground high-voltage power supply system is a multi-segment short cable composed of a single power supply step by step control trunk type longitudinal power supply network. The action value of the current quick-break protection between the stages is calculated according to the conventional method, and the overstep tripping phenomenon often occurs in the protection device. In this paper, a set of mine power network safety monitoring network system is developed. It is intended to apply microcomputer protection technology of mine distribution network switchgear, distribution network operation CAD and network technology to network the safety monitoring equipment and subsystem of mine high and low voltage power network. The feed IED and incoming IED are used for multi-level communication and information sharing. In order to construct the underground power supply network security protection, monitoring and early warning system based on artificial intelligence, the coal mine power supply network security guarantee system is formed. In this system, the MCGSTPC7062K embedded touch screen is installed in every substation of underground mining area, and the SNP-2611 mine monitoring and protection device is installed in each high voltage switch cabinet. The monitoring and protection device collects the operation status information of each switchgear in real time, transmits it to TPC7062K, through 485 communication and displays the power parameters. The TPC7062K embedded touch screen control sub-station transmits the underground information to the ground monitoring host through Ethernet ring network. The implementation of this project provides technical support for eliminating the long-standing hidden danger of overstepping trip caused by short-circuit fault in high-voltage power network of mine. So the research of this subject has great practical value and important significance to the safe and efficient production of coal mine.
【學位授予單位】：青島科技大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP368.12;TD611

【參考文獻】

相關期刊論文 前10條

1 董海鷹;孫傳華;;Research on Power Control of Wind Power Generation Based on Neural Network Adaptive[J];Journal of Measurement Science and Instrumentation;2010年02期

2 葛耀中,杜兆強,劉浩芳;自適應速斷保護的動作性能分析[J];電力系統自動化;2001年18期

3 丁曉群，林鐘云;神經網絡應用于電力變壓器故障診斷[J];電力系統自動化;1996年02期

4 田書;張勝朝;;礦井高壓電網的自適應過流保護研究[J];電網技術;2008年06期

5 李楊帆;蔣品群;李廷會;隆媛媛;;基于MCGS和MATLAB的薄膜厚度控制系統仿真[J];廣西師范大學學報(自然科學版);2010年02期

6 張桓;趙樹忠;;基于Modbus協議的單片機與觸摸屏通訊系統設計[J];河北理工大學學報(自然科學版);2010年04期

7 劉健,趙海鳴;繼電保護整定計算及定值仿真系統[J];繼電器;2002年09期

8 成艷;宋麗君;王文;郜竹金;楊以涵;戚宇林;;35kV線路故障定位的系統研究和實現[J];繼電器;2007年08期

9 張永建;劉少荷;王維;;基于MCGS的礦用主通風機在線監測與控制系統[J];機械設計與制造;2009年10期

10 李洪珠,付興武,李季;在VB程序中調用MATLAB計算短路電流方法的研究[J];遼寧工學院學報;2004年04期

相關碩士學位論文 前3條

1 付博峰;配電網故障定位及網絡重構研究[D];重慶大學;2004年

2 劉洪春;PLC和組態軟件在變電站控制系統中的應用研究[D];河北工業大學;2007年

3 王俊成;配電網小電流接地故障自動定位系統研究[D];山東大學;2008年

本文編號：2442739