【摘要】：數據中心機房內動力(配電柜、電源柜、UPS、發電機、蓄電池組等)、環境(空調,漏水檢測、溫濕度等)、消防(煙感檢測)、安防(紅外檢測、門禁等)等設備為數據中心計算機設備的可靠運行提供保障。因此,為了保證計算機設備的安全可靠工作,對機房內動力、環境及其他設備進行監控和管理是極其必要的。通過對數據中心機房內動力與環境設備的分析歸類,設計開發集中采集單元對機房內設備進行實時監測與控制。集中采集單元的硬件電路設計基于NXP公司的i.MX287處理器為核心單元,并設計供電電源電路、雙路以太網接口電路、智能設備接口電路、數據采集電路、外部存儲電路、USB總線擴展接口電路等電路模塊。集中采集單元的軟件基于Ubuntu 14.04 LTS操作系統設計開發,首先移植Uboot和Linux 2.6.35內核,并配置文件系統,編寫應用程序并編譯后下載到集中采集單元的硬件平臺,完成系統的集成。另外設計了基本的集中監控軟件用于實現對數據中心機房內設備的集中監控和對設計的集中采集單元的系統集成調試。設計開發的集中采集單元能夠實現對機房內動力與環境設備的實時監測與控制,可降低人力運維成本,減少維護費用。
[Abstract]:Data center room power (distribution cabinet, power cabinet, UPS, generators, batteries, etc.), environment (air conditioning, leak detection, temperature and humidity), fire (smoke detection), security (infrared detection, Access Control and other equipment for the data center computer equipment to provide a reliable operation of the guarantee. Therefore, in order to ensure the safe and reliable work of computer equipment, it is extremely necessary to monitor and manage the power, environment and other equipment in the computer room. By analyzing and classifying the power and environment equipments in the computer room of the data center, a centralized collection unit is designed to monitor and control the equipment in the computer room in real time. The hardware circuit design of the centralized acquisition unit is based on the i.MX287 processor of NXP Company, and designs the power supply circuit, dual Ethernet interface circuit, intelligent device interface circuit, data acquisition circuit, external storage circuit, etc. USB bus extended interface circuit and other circuit modules. The software of the centralized acquisition unit is designed and developed based on the Ubuntu 14.04 LTS operating system. Firstly, the kernel of Uboot and Linux 2.6.35 is transplanted, and the file system is configured, and the application program is compiled and downloaded to the hardware platform of the centralized acquisition unit. Complete system integration. In addition, the basic centralized monitoring software is designed to realize the centralized monitoring of the equipment in the data center computer room and the system integration debugging of the designed centralized acquisition unit. The design and development of the centralized acquisition unit can realize the real-time monitoring and control of the power and environmental equipment in the computer room, reduce the cost of human operation and maintenance, and reduce the cost of maintenance.
【學位授予單位】：蘭州理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP308

【參考文獻】

相關期刊論文 前5條

1 陳海軍;;論通信基站動力環境監控系統的設計和開發[J];中國管理信息化;2015年20期

2 王琪;;通信機房動環監控系統研究與設計[J];電源世界;2013年06期

3 高健;;動力環境集中監控系統的應用和發展[J];電信工程技術與標準化;2006年06期

4 雷遠揚;通信電源設備、空調和環境集中監控管理系統[J];電信工程技術與標準化;2003年12期

5 王艷文,宗凌;動力環境集中監控系統的現狀與演化[J];電信科學;1998年08期

相關碩士學位論文 前6條

1 孫志文;數據中心動力環境監控系統的研究與設計[D];燕山大學;2014年

2 鄭莎莎;基于TCP/IP的動力與環境監控系統數據傳輸研究[D];山東大學;2012年

3 陸崢;通信機房動力環境集中監控系統研究[D];北京郵電大學;2012年

4 丁晏飛;通信動力與環境集中監控系統的研究與應用[D];武漢科技大學;2008年

5 殷培紅;動力及環境集中監控系統的研究應用[D];華北電力大學（北京）;2007年

6 殷鵬;通信機房動力與環境監控系統實現和研究[D];南京理工大學;2002年

，

本文編號：2398860