多媒體教室遠程控制系統的研究與實現
發布時間:2018-07-12 08:41
本文選題:多媒體教室 + 網絡控制 ; 參考:《山東大學》2012年碩士論文
【摘要】:隨著計算機技術、多媒體技術日新月異的飛速發展,多媒體教學設備價格日益平民化,以計算機和投影機為基礎的多媒體教室在各類學校也不斷增加并漸漸得到了普及,改善了教學環境,但隨之而來的卻是專業技術人員的缺乏以及設備維護、管理難度的增加,甚至影響了教學質量,制約了現代教育技術在學校的應用與發展。 實現對教室多媒體設備的集中控制和網絡化管理是解決這一矛盾的關鍵,論文在造價經濟、操作簡便、使用可靠的原則下,研究并設計了一套適用于各類型學校的多媒體教室遠程控制系統。該系統具有兩部分的控制功能,一是教室內部多媒體設備的信號切換及控制,二是能夠通過校園局域網對各教室的多媒體設備進行遠程控制并監視其運行狀態。 論文首先分析了目前學校多媒體教室管理中存在的問題,概述了國內外對于多媒體教室遠程控制系統和嵌入式系統的發展歷史和研究現狀,確定了論文的研究方向和設計思路;論文基于嵌入式技術,提出了模塊化硬件設計思路,以凌陽SPCE061A單片機為主控芯片,詳細論述了控制面板模塊、音/視頻及VGA信號切換模塊、RS-232串口通信與投影機控制模塊和網絡接入模塊的設計理念、工作原理和測試結果,分析了鍵盤去抖、多路信號的同步切換等技術,重點介紹了網絡接入模塊中精簡型嵌入式TCP/IP協議的設計與實現;最后闡述了遠程監控軟件的功能要求,并詳細介紹了程序的設計過程,提出了遠程維修的思路和解決方法,分析了系統測試結果,通過測試,該多媒體教室遠程控制系統具備較好的穩定性,達到了使用要求,具有實用及推廣價值。
[Abstract]:With the rapid development of computer technology and multimedia technology, the price of multimedia teaching equipment is becoming more and more popular, and the multimedia classroom based on computer and projector is increasing and popularizing in all kinds of schools. The teaching environment has been improved, but the shortage of professional and technical personnel, the maintenance of equipment, the increase of management difficulty, and even the influence of teaching quality have restricted the application and development of modern educational technology in schools. The realization of centralized control and networked management of classroom multimedia equipment is the key to solve this contradiction. This paper studies and designs a set of multimedia classroom remote control system for all kinds of schools. The system has two parts of control function, one is the signal switching and control of the multimedia equipment in the classroom, the other is the remote control and monitoring of the multimedia equipment in each classroom through the campus local area network. Firstly, the paper analyzes the problems existing in the management of multimedia classroom, summarizes the development history and research status of multimedia classroom remote control system and embedded system at home and abroad, and determines the research direction and design idea of the paper. Based on the embedded technology, the paper puts forward the idea of modularization hardware design. Taking the Lingyang SPCE061A single chip computer as the main control chip, the control panel module is discussed in detail. The design concept, working principle and test results of RS-232 serial port communication and projector control module and network access module of audio / video and VGA signal switching module are analyzed. This paper mainly introduces the design and implementation of the simplified embedded TCP / IP protocol in the network access module, and finally expounds the functional requirements of the remote monitoring software, introduces the design process of the program in detail, and puts forward the ideas and solutions of remote maintenance. The system test results show that the remote control system of the multimedia classroom has good stability and meets the requirements of application. It has practical and popularized value.
【學位授予單位】:山東大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TP308;TP872
【參考文獻】
相關期刊論文 前6條
1 徐緯;;51單片機綜合學習系統——矩陣鍵盤篇[J];電子制作;2007年11期
2 蔣方劍;周鵬;劉福啟;;適合中小型院校的多媒體全自動控制系統的研究[J];中國現代教育裝備;2011年13期
3 曹廣芹;邢永營;;多媒體教室遠程控制的必要性[J];中國現代教育裝備;2011年11期
4 包建榮,厲魯衛;基于單片機嵌入式網絡接入模塊的設計與實現[J];微計算機信息;2004年02期
5 劉媛;張偉;王知學;;基于B/S和C/S架構的嵌入式遠程監控系統[J];儀表技術與傳感器;2008年10期
6 王劍,高明,高福祥,信俊昌;串行接口設備接入Internet的解決方案[J];儀器儀表學報;2004年S1期
相關碩士學位論文 前2條
1 孫柏祥;多媒體集中控制器的研制[D];黑龍江大學;2005年
2 王海峰;基于C/S的多媒體遠程集中控制系統的研究[D];武漢理工大學;2007年
,本文編號:2116606
本文鏈接:http://sikaile.net/kejilunwen/jisuanjikexuelunwen/2116606.html
最近更新
教材專著