本文選題：溫度監控系統 + 多點��； 參考：《計算機工程》2015年08期

【摘要】：數據中心一些關鍵部位的溫度監控系統存在溫度設置不合理的問題。為此,提出一種基于nRF24L01的無線多點溫度高頻實時采集設計方案,給出具體的系統硬件電路和軟件實現。該系統的硬件電路中各溫度傳感器與單片機的I/O端口一一對應,利用I/O端口標識溫度傳感器,提高采集頻率。軟件實現部分通過對數據進行壓縮處理,減少發送數據量,提高無線傳輸效率、降低功耗,從而實現溫度數據的傳輸、顯示并存檔等功能。實驗結果表明,該系統能以1 Hz的采集頻率同時對多個溫度點進行實時采集,采集溫度的誤差小于0.5℃,丟包率小于5%,并提高了無線通信的傳輸效率。
[Abstract]:The temperature monitoring system in some key parts of the data center has the problem of unreasonable temperature setting. Therefore, a design scheme of wireless multi-point temperature real-time acquisition based on nRF24L01 is presented, and the hardware circuit and software implementation of the system are given. In the hardware circuit of the system, each temperature sensor corresponds to the I / O port of the single chip microcomputer, and the temperature sensor is identified by using the I / O port to improve the acquisition frequency. The software realizes the functions of temperature data transmission, display and archiving by compressing the data, reducing the transmission data, improving the wireless transmission efficiency and reducing the power consumption. The experimental results show that the system can collect multiple temperature points simultaneously with a frequency of 1 Hz. The error of acquisition temperature is less than 0.5 鈩，

本文編號：2080754