本文選題：LED驅動 + 單片機　； 參考：《西安電子科技大學》2013年碩士論文

【摘要】：發光二極管（Light Emitting Diode, LED）是20世紀末出現的新型照明光源，在節約能源、保護環境方面性能突出。由于LED不能直接由電網供電，點亮LED的驅動電源成為重要的研究課題，基于開關電源技術設計的LED驅動電源在工程應用中顯示出了強大的競爭力。通過研究可編程器件作為LED驅動電路中核心的開關信號發生器，可以更好的滿足高集成度、簡單外圍電路、數字化控制等性能特點。 本文針對可編程器件C51系列單片機作為LED驅動電路中的核心控制芯片，，研究了單片機作為LED驅動電源的脈沖寬度調制（PWM）信號發生器，以及單片機為處理器的后級數字化控制方法。闡述了單片機的硬件電路工作原理和LED驅動相關技術。介紹了如何通過軟件方法來控制脈沖寬度調制信號達到調節驅動電源輸出的目的。分析了LED驅動的設計需求以及相關安全規章標準，給出了搭建電源硬件電路和單片機最小系統電路的具體方法，設計了基于C51系列單片機的軟件控制方法，實現了以C51系列單片機為脈沖寬度調制信號發生器的大功率LED驅動設計。 基于可編程器件單片機技術的LED驅動系統測試表明，正確的設計主電源電路結構，合理的控制脈沖寬度調制信號以及正確的后級采樣反饋可以完成穩定可靠的LED驅動的電源設計，提升工作效率，并且具有可擴展外部接口功能。達到了論文設計的目的要求。
[Abstract]:Light emitting Diode (LED) is a new type of lighting source which appeared at the end of the 20th century. It has outstanding performance in saving energy and protecting environment. Since LED can not be directly powered by power grid, it is an important research topic to light up LED driving power supply. The LED driving power supply based on switching power supply technology has shown a strong competitiveness in engineering applications. By studying the programmable device as the core switch signal generator in LED driving circuit, it can better meet the characteristics of high integration, simple peripheral circuit, digital control and so on. In this paper, aiming at the programmable device C51 series single chip microcomputer as the core control chip in the LED driving circuit, the pulse width modulation PWM) signal generator used by the single chip microcomputer as the LED driving power supply is studied in this paper. And the microprocessor as the processor of the subsequent digital control method. The working principle of hardware circuit and LED driving technology are described. This paper introduces how to control the pulse width modulation signal by software to adjust the output of driving power supply. In this paper, the design requirements of LED drive and related safety regulations are analyzed. The specific methods of building the hardware circuit of power supply and the minimum system circuit of single chip microcomputer are given, and the software control method based on C51 series single chip microcomputer is designed. The design of high power LED driver with C51 series single chip microcomputer as pulse width modulation signal generator is realized. The LED drive system test based on programmable device single-chip computer technology shows that the main power supply circuit structure is designed correctly. Reasonable control pulse width modulation signal and correct back stage sampling feedback can complete the power supply design of stable and reliable LED drive, improve working efficiency, and have the function of expandable external interface. Achieve the purpose of the paper design requirements.
【學位授予單位】：西安電子科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TN312.8;TP368.1

【參考文獻】

相關期刊論文 前3條

1 林雯;;淺談開關電源的技術發展趨勢[J];通信電源技術;2008年06期

2 王大鵬;陳昌龍;;新型白光LED驅動電路[J];現代顯示;2006年06期

3 吳樹誼,費勝娟;L6561功率因數校正器及其應用[J];中國照明電器;2004年06期

本文編號：2050110