發布時間：2018-06-08 00:31

  本文選題：可配置處理器 + 傳輸觸發體系結構(TTA)��； 參考：《天津大學》2012年碩士論文

【摘要】：隨著集成電路制造技術的進步,各種可定制處理器在嵌入式設計中得到了廣泛的應用。針對不同目標處理器結構生成優化的代碼成了編譯器的一個艱巨而重要的工作。當前,一種新型的可定制處理器結構——傳輸觸發架構(Transport Trigger Architecture, TTA)由于其靈活性、可擴展、高性能、低成本和低功耗等特點在科研機構和工業界中獲得了廣泛的關注。本文主要研究了TTA處理器的編譯器后端優化部分,主要包括了指令篩選和指令調度。 本文采用圖變換的方式進行DAG的預處理,解決了通常模式匹配中出現的由于拓撲結構不同,無法完成匹配的問題。通過按照一些特定的規則,在進行指令匹配之前進行DAG變換,使得變換之后的DAG結構與功能一一對應,從而使得功能相同的部分能夠完全完成匹配。并且通過特殊的建模方法,使得存在交集的待匹配節點集合也可以同時匹配。之后采用啟發式的遺傳算法搜索到近似的最優解。 在完成指令篩選之后,本文提出了一種基本塊范圍內的融合了遺傳算法和禁忌搜索的新型搜索算法模型。在確定了指令間的相互依賴關系以及資源約束后,通過在遺傳算法的架構下進行禁忌搜索近似最優的指令調度方案來完成指令調度。實驗結果表明與其他常規算法相比該算法不僅能夠產生較高質量的并行代碼,還能更快的完成收斂。
[Abstract]:With the development of IC manufacturing technology, various customizable processors have been widely used in embedded design. Generating optimized code for different target processor architectures has become a difficult and important task for compilers. At present, a new customizable processor architecture, Transport trigger Architecture (TTA), has gained wide attention in scientific research institutions and industry because of its flexibility, scalability, high performance, low cost and low power consumption. In this paper, the compiler back-end optimization of TTA processor is studied, including instruction filtering and instruction scheduling. In this paper, the DAG is preprocessed by graph transformation, which solves the problem of different topology in common pattern matching. Unable to complete the matching problem. According to some specific rules, the DAG transformation is carried out before the instruction matching, so that the transformed DAG structure corresponds to the function one by one, so that the part with the same function can complete the matching completely. And through the special modeling method, the set of nodes to be matched with intersection can be matched at the same time. Then the heuristic genetic algorithm is used to search the approximate optimal solution. After the instruction selection is completed, a new search algorithm model combining genetic algorithm and Tabu search is proposed in this paper. After the interdependence between instructions and resource constraints are determined, instruction scheduling is accomplished by using Tabu search approach to approximate optimal instruction scheduling scheme under the framework of genetic algorithm (GA). Experimental results show that this algorithm can not only produce high quality parallel code, but also complete convergence faster than other conventional algorithms.
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP332

【參考文獻】

相關期刊論文 前5條

1 胡維;祝永新;姜雷;;基于整數線性規劃的TTA代碼優化[J];計算機工程;2008年21期

2 趙康;邊計年;董社勤;;基于集束式整數線性規劃模型的專用指令集自動定制[J];計算機輔助設計與圖形學學報;2007年10期

3 沈立;張晨曦;呂雅帥;王志英;;指令擴展中相關子圖的分析與處理[J];計算機輔助設計與圖形學學報;2009年10期

4 薄拾;葛寧;林孝康;;一種高效的凸連通子圖枚舉算法[J];軟件學報;2010年12期

5 薄拾;葛寧;林孝康;;面向多任務的定制指令模式提取[J];計算機工程與設計;2010年15期

，

本文編號：1993531