發布時間：2018-05-16 23:25

  本文選題：便攜式QCM + 石英晶體多諧振蕩��； 參考：《現代電子技術》2017年16期

【摘要】：設計一種以STC89C52RC為控制核心的高精度可調便攜式QCM檢測系統。系統包括石英晶體多諧振蕩、頻率處理、單片機控制、RS 232通信等模塊,使用石英晶體多諧振蕩模塊完成晶振片的驅動、頻率選擇、整形,輸出信號經頻率處理模塊處理后交給單片機控制模塊計數并顯示,RS 232通信模塊實現單片機與計算機之間數據傳輸。與現有的檢測裝置相比硬件方面濾波器設置為巴特沃茲三階可調帶通濾波器,通過調節其中心頻率可滿足多種頻率晶振片需要,在軟件設計中加入溫度控制機制進一步提高了系統的穩定性,測量誤差僅為0.03%,且成本低、攜帶方便,達到了設計要求。
[Abstract]:A high precision and adjustable portable QCM detection system based on STC89C52RC is designed. The system includes quartz crystal multi-harmonic oscillation, frequency processing, single-chip microcomputer control RS232 communication module, using quartz crystal multi-harmonic oscillation module to complete the drive, frequency selection, shaping, etc. The output signal is processed by the frequency processing module and passed to the control module of the single chip microcomputer to count and display the RS232 communication module to realize the data transmission between the single chip computer and the computer. Compared with the existing detection devices, the hardware aspect filter is set as the Butterworth third-order tunable band-pass filter, which can meet the needs of various frequency wafers by adjusting its central frequency. The stability of the system is further improved by adding the temperature control mechanism in the software design. The measuring error is only 0.033.And the cost is low, the carrying is convenient, and the design requirements are met.
【作者單位】： 成都信息工程大學通信工程學院;電子科技大學光電信息學院;
【基金】：國家自然科學創新研究群體項目(61421002)
【分類號】：TP274;TP368.1
，

本文編號：1898885