本文選題：FDM + 彩色D打印機��； 參考：《機床與液壓》2017年04期

【摘要】：當前基于FDM的3D打印機大部分只能使用一種顏色的耗材,因此打印件顏色單一。為了解決這一問題,在深入研究FDM 3D打印機工作原理的基礎上,設計一套彩色3D打印機擠出裝置,對普通切片軟件進行了二次開發,編寫了與擠出裝置相匹配的彩色切片插件,并進行了樣機的試制與調試。通過打印試驗,驗證了所設計的擠出裝置及彩色切片插件達到了設計要求,實現了彩色打印,為彩色3D打印技術的進一步研究提供參考。
[Abstract]:At present, 3D printers based on FDM can only use one color of consumables, so the color of printed parts is single. In order to solve this problem, a set of color 3D printer extrusion device is designed on the basis of deeply studying the working principle of FDM 3D printer. The common slice software is redeveloped, and the color slicing plug-in matching with the extrusion device is compiled. The prototype is trial-produced and debugged. Through the printing test, it is verified that the extrusion device and the color chip plug-in have met the design requirements, and the color printing has been realized, which provides a reference for the further research of color 3D printing technology.
【作者單位】： 鄭州科技學院機械工程學院;
【基金】：河南省科技廳科技攻關項目(142102210509) 河南省教育廳重點科技攻關項目(14A460015)
【分類號】：TP334.8
，

本文編號：1832782