發布時間：2018-04-30 15:06

  本文選題：數據采集 + OMAP　； 參考：《哈爾濱工程大學》2013年碩士論文

【摘要】：水下目標探測系統在海洋資源勘探、國防建設等領域應用廣泛，發展迅速。而現當今也經歷著電子器件高速發展的重要時期，高性能信號處理器如雨后春筍般出現在我們的工作和生活中。研究如何將高性能的處理器應用于目標探測系統中，具有十分現實的意義。本文基于OMAP-L138硬件平臺的數據采集存儲技術的研究最終應用在水下目標探測系統中，實現了單通道數據采集、存儲、網絡控制等功能。 本文的主要工作是在合眾達公司的SEED-DEC138平臺上實現對單通道數據的采集、存儲等功能。首先，本文查閱了國內外廠商提供的硬件開發平臺，結合本文研究的實際背景，最終選定了合眾達公司的SEED-DEC138板卡作為軟件開發的載體。并結合系統需要在水下獨立工作的實際情況，解決了OMAP-L138處理器的啟動方式、Bootloader等問題。其次使用OMAP的DSP端基于DSP/BIOS完成了利用EDMA同時實現數據采集，SD卡存儲，，I2C總線控制，TCP/IP網絡控制等軟件開發工作。為了平衡處理器雙核的任務量并充分利用處理器的硬件資源，初步研究了雙核通信技術實現數據采集存儲功能的方法。最后，對DSP端的軟件設計進行了系統聯調，聯調后數據能夠連續采集和存儲，并能通過網絡控制板卡工作狀態和參數，達到預期目的。 經過系統聯調測試，軟件設計滿足系統設計要求并可穩定工作，系統運行正常。為后續的數據回放、更高級算法處理實驗數據提供了便利。
[Abstract]:Underwater target detection system is widely used in marine resources exploration, national defense construction and other fields. Nowadays, high performance signal processors are springing up in our work and life. It is of practical significance to study how to apply high performance processors to target detection systems. In this paper, the data acquisition and storage technology based on OMAP-L138 hardware platform is applied to the underwater target detection system, and the functions of single channel data acquisition, storage and network control are realized. The main work of this paper is to realize the function of collecting and storing single channel data on SEED-DEC138 platform. First of all, the hardware development platform provided by domestic and foreign manufacturers is consulted in this paper. Combined with the actual background of this paper, the SEED-DEC138 board of Unitas Corporation is selected as the carrier of software development. Combined with the actual situation that the system needs to work independently under water, the startup mode of OMAP-L138 processor is solved, such as bootloader. Secondly, based on DSP/BIOS, the DSP of OMAP is used to realize the software development of IP / IP network control by using EDMA to realize data acquisition / SD card storage / I2C bus control at the same time. In order to balance the task of dual-core processor and make full use of the hardware resources of the processor, the method of realizing data acquisition and storage by dual-core communication technology is studied preliminarily. Finally, the software design of DSP is combined and adjusted. The data can be continuously collected and stored, and the working state and parameters of the card can be controlled by network to achieve the desired purpose. The software design meets the requirements of system design and can work stably, and the system runs normally. For the subsequent data playback, more advanced algorithm to process experimental data provides convenience.
【學位授予單位】：哈爾濱工程大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP333;TP274.2

【參考文獻】

相關期刊論文 前5條

1 郭紅衛;易茂祥;李新力;;總線協議中的CRC及其在SATA通信技術中的應用[J];電子科技;2010年11期

2 翟麗杰;;TMS320C6000系列DSP的自啟動設計[J];河南科學;2012年07期

3 周禮慶;;嵌入式視頻處理EDMA數據存儲[J];科技情報開發與經濟;2011年12期

4 何亞軍;鄧飛其;;嵌入式Linux中I2C總線驅動程序設計[J];計算機工程與設計;2008年10期

5 張洪濤;莫文承;李兵兵;;基于SPI協議的SD卡讀寫機制與實現方法[J];電子元器件應用;2008年03期

本文編號：1825039