本文選題：USB3.0 + 超速傳輸　； 參考：《中國科學院研究生院（西安光學精密機械研究所）》2013年碩士論文

【摘要】：USB串行通用總線，以其方便使用，即插即用，支持熱插拔的特點，而廣泛應用于計算機外設。目前USB2.0廣泛應用于各個領域，但局限于其傳輸速率不高，只能用于中低速傳輸，對于高速圖像數據、視頻數據傳輸有一定的限制。USB3.0標準白皮書于2008年正式發布，傳輸速率達到5Gbps。傳輸速率可以與Camera Link總線、IEEE1394等高速傳輸總線的傳輸速率相匹敵。同時具有支持熱插拔，接口結構簡單，對于PC接口要求不高的特點。USB3.0的出現是通用串行總線發展的一個里程碑。USB3.0將成為傳輸總線流行的大趨勢，在一定應用領域?qū)⑻娲咚倏偩�Camera Link總線、IEEE1394。 隨著信息時代的不斷發展，高速大量的數據采集，在我們生活和科研領域顯得尤為重要。如何實現大量數據高速采集，是一個重要的課題。論文首先介紹了幾種常用的高速總線，分析了USB3.0數據總線的優勢。接著分析了USB3.0傳輸?shù)脑砗蛢?yōu)勢。本設計實現基于USB3.0的大量數據的高速采集。模擬產生高速圖像數據，通過DDR2實現高速緩存，利用USB3.0高速總線傳輸高速圖像數據。完成USB3.0固件開發，應用程序開發，將接收到的數據進行存儲顯示。實驗結果表明，可實現高達2Gbps的高速數據采集，，達到預期效果。在數據存儲部分，應用固態盤磁盤陣列，實現高速數據讀寫。 論文對USB3.0的傳輸高速圖像數據的研究，為以后將USB3.0高速總線用于相機系統奠定了很大基礎，方便后續應用開發。
[Abstract]:USB serial universal bus is widely used in computer peripherals because of its convenience, plug and play and hot plug and play. At present, USB2.0 is widely used in various fields, but limited to its low transmission rate, it can only be used for medium and low speed transmission. For high speed image data, video data transmission has some limitations. The white paper of USB3.0 standard was officially released in 2008, and the transmission rate reached 5Gbps. The transmission rate is comparable to that of Camera Link bus and IEEE 1394. At the same time, it has the characteristics of supporting hot-plug, simple interface structure and low requirement for PC interface. The appearance of USB3.0 is a milestone in the development of Universal Serial bus. USB3.0 will become a popular trend of transmission bus. The Camera Link bus will be replaced by IEEE1394 in certain application fields. With the development of information age, high-speed data acquisition is becoming more and more important in our life and scientific research field. How to achieve high-speed data acquisition is an important issue. Firstly, several high-speed buses are introduced, and the advantages of USB3.0 data bus are analyzed. Then the principle and advantages of USB3.0 transmission are analyzed. This design realizes the high-speed data acquisition based on USB3.0. High-speed image data is generated by simulation, cache is realized by DDR2, and high-speed image data is transmitted by USB3.0 high-speed bus. Complete USB3.0 firmware development, application development, will receive data storage display. The experimental results show that the high speed data acquisition up to 2Gbps can be achieved. In the data storage part, the solid-state disk array is used to realize high-speed data reading and writing. In this paper, the research on the transmission of high speed image data by USB3.0 lays a great foundation for the application of USB3.0 high-speed bus in camera system, and it is convenient for subsequent application development.
【學位授予單位】：中國科學院研究生院（西安光學精密機械研究所）
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP274.2;TP336

【參考文獻】

相關期刊論文 前4條

1 劉妍秀;;USB3.0體系結構及發展前景[J];長春大學學報;2010年10期

2 高文偉;顧明劍;王模昌;;基于USB2．0的高速實時圖像數據采集系統[J];科學技術與工程;2007年09期

3 梁華英;高文強;;基于Cyclone Ⅲ FPGA的DDR2接口設計分析[J];世界電子元器件;2011年04期

4 高振江;;USB3.0通用串行接口技術[J];電子元器件應用;2009年07期

本文編號：1792591