基于單片機socket通信技術的溫度監控系統設計
本文選題:硬協議棧連接 + 溫度監控; 參考:《河北科技大學》2012年碩士論文
【摘要】:本文在國家提倡大力發展物聯網建設的背景下,對環境監控領域終端設備的網絡化數據傳輸進行了研究。在分析了當前網絡通信技術與終端設備核心控制技術的基礎之上,提出了通過硬協議棧連接技術實現終端控制核心(單片機)與中央監控中心(主控計算機)的可視化數據傳輸與控制的系統設計方案。該系統可以把多個遠端設備的溫度監測數據通過計算機網絡進行socket傳輸,在主控計算機的操作界面上可以選擇并觀測任一終端的數據信息,并能對其進行簡單指令控制。 文中以溫度監控為例介紹了以單片機為核心實現遠端設備的環境溫度測量、以硬協議棧芯片為基礎實現單片機(MCU)數據的網絡傳輸及用C#語言編程實現主控計算機的界面操作,最終設計完成一個多對一的智能設備網絡化數據傳輸系統。該系統采用模塊化設計,軟、硬件移植相對簡單,并且利用了現有的成熟的計算機網絡軟、硬件設施,開發周期較短,可以廣泛的應用在物聯網建設及工業控制領域,避免了傳統工控組網建設的高成本、標準繁多、兼容性及可靠性差等缺點。 系統設計時采用了不含操作系統的低端單片機,,價位與當前廣泛應用的經濟型智能終端的核心控制器保持一致;采用了價格低廉的硬協議棧芯片來實現遠端數據的網絡傳輸,免除了遠端控制器對網絡協議的復雜操作,保證了系統的經濟性與廣泛適應性。整個系統完成了實際的電路制作與界面仿真,運行結果良好,符合論文題目要求。
[Abstract]:In this paper, the networked data transmission of terminal equipment in the field of environmental monitoring and control is studied under the background of promoting the construction of Internet of things. Based on the analysis of the current network communication technology and terminal equipment core control technology, This paper presents a system design scheme to realize the visual data transmission and control between the terminal control core (single chip microcomputer) and the central monitoring center (main computer) through the hard protocol stack connection technology. The system can transmit the temperature monitoring data of many remote devices through the computer network for socket transmission. The data information of any terminal can be selected and observed on the operating interface of the main control computer and can be controlled by simple instructions. Taking temperature monitoring as an example, this paper introduces how to realize the environmental temperature measurement of remote equipment with single chip microcomputer as the core, how to realize the network transmission of MCU MCU data on the basis of hard protocol stack chip, and how to realize the interface operation of main control computer by C # programming. Finally, a multi-to-one intelligent device networked data transmission system is designed. The system adopts modular design, software and hardware transplantation is relatively simple, and the existing mature computer network software, hardware facilities, the development cycle is short, can be widely used in the field of Internet of things construction and industrial control, It avoids the disadvantages of high cost, high standard, poor compatibility and reliability of traditional industrial control network construction. In the design of the system, the low end MCU without operating system is used, the price is consistent with the core controller of the economical intelligent terminal, and the low price hard protocol stack chip is used to realize the network transmission of remote data. The remote controller eliminates the complex operation of the network protocol and ensures the economy and wide adaptability of the system. The whole system has completed the actual circuit making and interface simulation, and the running results are good, which meet the requirements of the thesis.
【學位授予單位】:河北科技大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TP368.1;TP277
【參考文獻】
相關期刊論文 前10條
1 張敬敬;朱永利;張雷;郝寧;;面向智能電網的PMU數據通信的研究[J];電力科學與工程;2011年02期
2 馬曉慧;;.NET平臺下角色訪問動態樹型菜單的實現[J];電腦編程技巧與維護;2011年01期
3 葛福鴻;劉曉瑩;張麗萍;;基于Socket技術的即時通信軟件的設計與實現[J];電腦開發與應用;2011年05期
4 茹金平;;基于Internet的遠程監控系統設計[J];電腦知識與技術;2010年27期
5 康文廣;胡利民;;基于W3150A+的嵌入式Web服務器設計[J];單片機與嵌入式系統應用;2010年06期
6 夏翠強;劉丹;;基于W5100以太網接入設備的設計[J];電子產品世界;2010年05期
7 陳元謀;吳長奇;;基于Socket的遠程監控的通信系統實現[J];計算機安全;2011年03期
8 溫陽東;何tD;鄧箐;;基于RTL8019AS的以太網接口單元研究[J];儀器儀表用戶;2006年03期
9 周旭東;楊家鑒;;基于NIOSⅡ的光纖以太網CCD相機系統設計[J];半導體光電;2009年05期
10 蔡明偉;于國慶;;常溫條件下的CO監控系統設計[J];河北工業科技;2009年04期
相關碩士學位論文 前3條
1 杜歡;TCP/IP協議在以太網現場總線及虛擬儀器中的研究與應用[D];電子科技大學;2002年
2 顧毅;工業控制網絡平臺的構建及其無線化技術研究[D];哈爾濱工程大學;2008年
3 成鷗;基于以太網接口的網絡化虛擬儀器技術研究[D];西安電子科技大學;2010年
本文編號:1786387
本文鏈接:http://sikaile.net/kejilunwen/jisuanjikexuelunwen/1786387.html