本文選題：數字信號處理器 + CAN總線　； 參考：《計算機工程》2015年11期

【摘要】：集群實時多任務要求數字信號處理器(DSP)能夠?qū)崟r(shí)動態切換應用程序。為此,在分析DSP自啟動方式的基礎上,使用大容量Nor Flash作為自啟動應用程序的緩存,提出一種在CAN總線網絡中可為多DSP系統實時動態切換應用程序的方法。實驗結果表明,有緩存機制的平均自啟動時間明顯小于無緩存機制,且在緩存命中的條件下可提高集群內DSP自啟動的實時性。
[Abstract]:Real-time multitasking in cluster requires DSP (Digital signal processor) to switch applications dynamically in real time. In this paper, based on the analysis of DSP self-start mode, a method of real-time dynamic switching of applications for multiple DSP systems in CAN bus network is proposed by using large capacity Nor Flash as the cache of self-boot applications. The experimental results show that the average self-start time of DSP with cache mechanism is obviously lower than that without cache mechanism, and the real-time performance of DSP self-start in cluster can be improved under the condition of cache hit.
【作者單位】： 浙江大學生物醫學工程與儀器科學學院;杭州電子科技大學計算機學院;
【基金】：浙江省自然科學基金資助項目(Y1101336)
【分類號】：TP332

【相似文獻】

相關期刊論文 前10條

1 謝桂芳;段盛;曹菊英;;多接口多信道無線網狀網的信道動態切換研究[J];微電子學與計算機;2011年01期

2 曾W，

本文編號：1784786