高速大容量記錄儀的USB3.0高速讀數接口設計
本文選題:USB + .; 參考:《電子技術應用》2016年12期
【摘要】:針對當前USB 2.0已不能滿足對高速大容量數據記錄儀快速讀數的要求,設計了一種基于USB 3.0的高速讀數接口。系統以存儲陣列構建的某高速大容量機載雷達數據記錄儀為背景,USB 3.0采用Slave FIFO接口模式,以記錄儀的FPGA為外部主控制器,在FPGA內部構建一個高速FIFO實現對存儲數據的緩存與傳輸,最后通過USB 3.0接口高速傳輸至計算機。重點介紹了USB 3.0讀數接口硬件及其固件程序和FPGA控制程序的設計,并采用GPIF Designer II及Quartus II軟件進行仿真與驗證。實驗結果表明,該USB 3.0接口速率可達120 MB/s,滿足記錄儀高速讀取的要求。
[Abstract]:In view of the current USB 2 has been unable to meet the high speed and large capacity data recorder fast reading requirements, the design of a high-speed readout interface based on USB 3. A high speed and large capacity of airborne radar data recorder system to store the array construction as the background, using Slave USB 3 FIFO interface mode, with FPGA as the main controller of external recorder in FPGA, a high-speed FIFO implementation of the construction of internal cache and transmission of data, and finally through the USB 3 interface for high speed transmission to the computer. The paper mainly introduces the design of USB interface hardware and firmware 3 reading program and FPGA control program, and the simulation and verification by GPIF Designer II and Quartus II software. The experimental results show that the USB 3 interface speed reaches 120 MB/s, meet the requirements. The high speed read recorder
【作者單位】: 中北大學電子測試技術國家重點實驗室;中北大學儀器科學與動態測試教育部重點實驗室;
【分類號】:TP334.7
【相似文獻】
相關期刊論文 前10條
1 Joseph Juan;;克服USB3.0系統設計中的挑戰[J];中國電子商情(基礎電子);2012年08期
2 劉瑞芳;丁衛平;胡文靜;梅孝安;劉鑫;;基于USB3.0高速數據采集系統的研究與設計[J];現代計算機(專業版);2011年30期
3 ;接口大比拼 USB3.0王者無愧[J];現代計算機;2010年10期
4 王宗超;倪凱;王偉能;王鴻鈞;趙詣;;新一代高速串行接口USB3.0介紹[J];記錄媒體技術;2010年02期
5 ;安捷倫科技將在USB3.0開發者大會演示超高速USB測試解決方案系列[J];中國電子商情(基礎電子);2009年06期
6 陳鍇;;基于USB3.0的設備自定義請求實現方法[J];電腦知識與技術;2013年07期
7 廖惠如;;USB3.0的挑戰與機會[J];電子與電腦;2009年03期
8 徐俊毅;;德州儀器助推USB3.0市場成長[J];電子與電腦;2010年08期
9 輕指飛揚;hiker;;USB3.0筆記本真的需要嗎[J];電腦愛好者;2012年03期
10 ;華碩推出USB3.0主板和擴展卡[J];辦公自動化;2009年23期
相關會議論文 前1條
1 肖飚;朱國祥;;USB3.0電纜的研發[A];中國通信學會2010年光纜電纜學術年會論文集[C];2010年
相關重要報紙文章 前1條
1 電腦報評測實驗室周刊主筆 胡進;冷眼看USB3.0接口[N];電腦報;2012年
相關碩士學位論文 前2條
1 溫建飛;基于FPGA和USB3.0的超高速數據采集系統設計[D];中北大學;2016年
2 李達倫;基于USB3.0的EMCCD相機高速數據傳輸系統的研究[D];昆明理工大學;2014年
,本文編號:1731654
本文鏈接:http://sikaile.net/kejilunwen/jisuanjikexuelunwen/1731654.html