本文選題：空壓機　切入點：監控系統　出處：《自動化儀表》2014年01期 　論文類型：期刊論文

【摘要】：針對工業上廣泛使用的空氣壓縮機組,設計了一種基于嵌入式系統的機組運行狀態監控系統。系統以微處理器為核心,集通信、采集、處理和存儲功能于一體,通過移植嵌入式操作系統μC/OS-II來完成任務的調度和管理。分別給出了監控系統總體設計方案、硬件電路和軟件設計流程。仿真和實際應用表明,該系統具有較好的可靠性、實時性、穩定性,安裝調試方便,能有效地監控空壓機組運行時的各個狀態。
[Abstract]:Aiming at the air compressor widely used in industry, a kind of unit running state monitoring system based on embedded system is designed. The system takes microprocessor as the core and integrates the functions of communication, collection, processing and storage. The task scheduling and management are accomplished by transplanting the embedded operating system 渭 C/OS-II. The overall design scheme, hardware circuit and software design flow of the monitoring system are given respectively. The simulation and practical application show that the system has good reliability. Real-time, stability, easy to install and debug, can effectively monitor the air compressor group operation of each state.
【作者單位】： 上海大學機電工程與自動化學院;
【分類號】：TP277;TP368.12

【參考文獻】

相關期刊論文 前8條

1 劉震;王燕;;基于MSC1210微型稱重傳感器的設計[J];遼寧科技學院學報;2011年01期

2 潘輝;;STM32-FSMC機制的NOR Flash存儲器擴展技術[J];單片機與嵌入式系統應用;2009年10期

3 李蕓婷;萬振凱;;Pt100溫度傳感器數據實時采集系統[J];儀器儀表用戶;2007年05期

4 姜U，

本文編號：1652809