企業門禁系統的設計與實現
本文關鍵詞: 嵌入式系統 ARM9 S3C2410 指紋識別 TCP/IP 協議 出處:《電子科技大學》2012年碩士論文 論文類型:學位論文
【摘要】:隨著嵌入式、數據庫、指紋自動識別等技術的迅速發展,電子工程業也迅速發展起來,在適應信息化得發展的同時,多種技術綜合應用的工程技術,將人們工作效率提到了一個新的臺階。 由于新技術的眾多優越性,,使得人們對于現代化的辦公和生活場所的安全,提出了更高的要求,傳統的門鎖系統以及手工管理,已經遠遠落后于當代人們的實際需要,隨著計算機和通信網絡的進步,人們開始開創了一個安防智能化以及網絡化的時代,同時為了推進智能樓宇以及智能小區的快速發展,現在的門禁系統同樣需要必須與時俱進,采用更可靠更安全的系統。 本文根據企業的實際需要,綜合利用多種技術,設計實現了一個全新類型的門禁系統。這個門禁系統在設計的時候,采用了多種新思想,各個部分設計時采用了模塊化技術,在前端用基于ARM9S3C2410的嵌入式系統完成指紋識別前端的信息采集,然后通過基于TCP/IP協議的網絡上完成與核心服務器端的信息的傳輸,在核心服務器中用數據庫技術管理門禁系統相關數據信息,整個門禁系統由于采用了網絡協議,可移植性增加,方便企業遷移等事宜。 根據門禁系統功能要求結合實際應用,我們采用ARM9S3C2410做硬件基礎,并在其基礎之上設計實現了滿足硬件需求的的架構,并詳細研究修改硬件操作系統Linx中的一些問題,設計了適應于該平臺的引導程序。根據硬件接口特性,實現了集成指紋圖像捕捉傳遞等功能于一體的指紋識別前端。 最后,對于系統的通信方式,我們?cè)O(shè)計了一個新的通信協議,由于這個協議時基于TCP/IP的,在設計協議的時候我們還設計了相關命令,以此為基礎,我們最終設計實現企業門禁系統管理軟件。
[Abstract]:With the rapid development of embedded database fingerprint automatic identification and other technologies the electronic engineering industry has also developed rapidly. The efficiency of people's work has been brought to a new level. Because of the advantages of the new technology, people put forward higher requirements for the security of modern office and living place, traditional door lock system and manual management. Has fallen far behind the actual needs of contemporary people, with the progress of computer and communication network, people began to create a security intelligent and networked era. At the same time, in order to promote the rapid development of intelligent buildings and intelligent residential areas, the current access control system also needs to keep pace with the times and adopt a more reliable and secure system. In this paper, according to the actual needs of enterprises, comprehensive use of a variety of technologies, the design and implementation of a new type of access control system in the design, the use of a variety of new ideas. Each part of the design uses modular technology, in the front end of the embedded system based on ARM9S3C2410 to complete fingerprint recognition front-end information collection. Then through the network based on TCP/IP protocol to complete the transmission of information with the core server, in the core server using database technology to manage the access control system related data information. Because of the adoption of network protocol, the whole access control system increases portability and facilitates enterprise migration. According to the functional requirements of the access control system combined with practical applications, we use ARM9S3C2410 as the hardware basis, and on the basis of the design and implementation of the architecture to meet the hardware requirements. Some problems in modifying the hardware operating system Linx are studied in detail, and a bootstrap program suitable for this platform is designed, according to the characteristics of the hardware interface. The fingerprint recognition front end which integrates the functions of fingerprint image capture and transfer is realized. Finally, for the communication mode of the system, we design a new communication protocol, because this protocol is based on TCP/IP, we also design the relevant commands when designing the protocol, which is the basis. We finally design and implement the management software of the enterprise access control system.
【學位授予單位】:電子科技大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TP311.52;TP368.1
【相似文獻】
相關期刊論文 前10條
1 鄭冰;賈紅云;趙立本;;基于ARM的指紋識別門禁系統設計[J];微計算機信息;2007年05期
2 張宏衛;劉廣富;;基于ARM的指紋識別門禁系統設計[J];科技信息(學術研究);2008年06期
3 張曉婷;徐曉輝;王盟;王海龍;馬艷錚;;基于無線傳感器網絡門禁系統研究[J];山西電子技術;2010年01期
4 呂憲軍;陳后金;;基于ARM9的指紋識別門禁系統[J];現代電子技術;2010年14期
5 董婷婷;張曙光;;基于指紋識別的門禁多媒體教室管理系統[J];農業網絡信息;2011年03期
6 陳懷熹;張星明;黃波;;人臉指紋門禁系統的設計與實現[J];微計算機信息;2009年14期
7 陳懷熹;張星明;黃波;;人臉指紋門禁系統的設計與實現[J];安防科技;2009年07期
8 曹國平;;基于FPS110的以太網指紋門禁系統[J];電腦知識與技術;2011年02期
9 張愛麗;曹英;;指紋識別門禁系統的設計[J];計算機與網絡;2010年Z1期
10 榮鋒;厲彥峰;;基于網絡的門禁系統的設計[J];天津工業大學學報;2008年01期
相關會議論文 前10條
1 仝志強;;無線電子鎖芯在門禁系統中的應用[A];天津市電視技術研究會2011年年會論文集[C];2011年
2 楊杰;范麗仙;;基于指紋識別的開放性實驗室管理系統[A];教育部中南地區高等學校電子電氣基礎課教學研究會第二十屆學術年會會議論文集(下冊)[C];2010年
3 王天雷;朱盛方;張金玲;康獻民;王大承;;門禁系統關鍵技術研究現狀和發展趨勢[A];首屆珠中江科協論壇論文集[C];2011年
4 王陽利;毛哲文;張東;;指紋識別原理及應用[A];第六屆全國計算機應用聯合學術會議論文集[C];2002年
5 苑瑋琦;夏義勇;;方向?yàn)V波指紋圖像二值化[A];首屆信息獲取與處理學術會議論文集[C];2003年
6 馬龍;;指紋識別的門禁系統[A];天津市電視技術研究會2009年年會論文集(1)[C];2009年
7 劉元寧;苑森淼;朱曉冬;沙蕓;;指紋識別中的一種基于幾何結構的匹配方法[A];中國儀器儀表學會第三屆青年學術會議論文集(上)[C];2001年
8 何培重;陳祥光;王渝;;智能門禁系統集成技術應用研究[A];第八屆全國信息獲取與處理學術會議論文集[C];2010年
9 李晶晶;王敏蓉;李鵬飛;王國平;;住宅小區門禁系統的防雷設計[A];第28屆中國氣象學會年會——S13雷電物理、監測預警和防護[C];2011年
10 張松宇;呂芳;;指紋圖像預處理算法研究[A];全國第二屆信號處理與應用學術會議?痆C];2008年
相關重要報紙文章 前10條
1 ;分季應用 提高效率 做大市場[N];中國郵政報;2009年
2 甘肅記者 洪國霞;大漠深處那抹綠[N];中國郵政報;2006年
3 記者 謝志娟;莫高窟啟用智能化門禁系統[N];甘肅日?qǐng)?bào);2006年
4 王杰 記者 孫寰宇;長春汽博會門禁系統再升級[N];吉林日?qǐng)?bào);2011年
5 本報通訊員 陸麗云 記者 朱桂峰;小小明信片“刷”出大世界[N];中國郵政報;2006年
6 周慧虹;留神!自助銀行門禁系統[N];金融時報;2007年
7 宋紀功邋周建超 特約通訊員 張紅旗;理清兩條線 筑牢防火墻[N];中國國防報;2008年
8 本報記者 胡英;加固PKI 的“門禁系統”——身份認證[N];計算機世界;2003年
9 羅鯤;吐魯番局門禁系統落戶民俗園[N];中國郵政報;2006年
10 徐昕;指紋識別融入現代生活[N];中國計算機報;2005年
相關博士學位論文 前10條
1 阿邁吉(Amjad Ali);[D];北京郵電大學;2012年
2 張博;基于數據挖掘和融合理論的殘缺指紋識別應用研究[D];北京郵電大學;2012年
3 回紅;基于結構的指紋表達及其匹配算法研究[D];浙江大學;2002年
4 陳宏濤;基于熵分析的指紋識別與加密算法應用研究[D];西安電子科技大學;2012年
5 陳暉;結合方向場特征的扭曲指紋圖像識別技術研究[D];國防科學技術大學;2011年
6 江虹;基于手部特征識別關鍵技術的研究與實現[D];吉林大學;2011年
7 李永;多樣本、多單元、多角度、多模態生物特征識別技術的研究[D];國防科學技術大學;2011年
8 張圓圓;指紋識別技術相關算法的研究[D];北京郵電大學;2012年
9 王瑋;自動指紋識別系統關鍵技術研究[D];重慶大學;2007年
10 任春曉;自動指紋識別中若干關鍵算法的研究[D];山東大學;2011年
相關碩士學位論文 前10條
1 陳玲;實驗室指紋門禁系統的研究[D];哈爾濱工程大學;2004年
2 劉愛萍;基于指紋識別的高校公寓門禁系統[D];西安建筑科技大學;2007年
3 曹秒;活體指紋采集儀[D];長春理工大學;2004年
4 陳友明;基于紋理分析的指紋識別研究與實現[D];中南大學;2010年
5 陳華;基于IC卡的指紋圖像處理應用研究[D];湖南大學;2002年
6 樊相奎;指紋識別在智能門禁系統的研究與應用[D];四川師范大學;2010年
7 韓冰;分布式指紋識別考勤系統設計[D];河北科技大學;2011年
8 楊明月;企業門禁系統的設計與實現[D];電子科技大學;2012年
9 趙鵬飛;基于TMS320C5402 DSP的指紋識別系統研究[D];中北大學;2006年
10 李妍;基于嵌入式WinCE的指紋識別門禁技術研究[D];中北大學;2010年
本文編號:1477123
本文鏈接:http://sikaile.net/kejilunwen/jisuanjikexuelunwen/1477123.html