TiAlN/Cu nanocomposite coatings with Cu concentration of 0–1.4 at.% were deposited on the highspeed steel（HSS） substrates by filtered cathodic arc ion plating technique.The chemical composition,microstructure,morphology,adhesion strength,mechanical and tribological properties of the TiAlN/Cu coatings were characterized and analyzed.The results reveal that the coating structure and properties depend on not only the Cu concentration,but also the deposition condition.The addition of Cu significantl... 

【文章來源】：Journal of Materials Science & Technology. 2017,33(01)

【文章頁數】：6 頁

【文章目錄】：
1. Introduction
2. Experimental
3. Results and Discussion
    3.1. Chemical composition and XPS analysis
    3.2. Phase and crystal structure
    3.3. Mechanical properties and tribological property
    3.4. Morphology and microstructure
    3.5. Adhesion strength
    3.6. Discussion
4. Conclusion


【參考文獻】：
期刊論文
[1]Ti（C,N）晶粒尺寸對金屬陶瓷表面物理氣相沉積的TiAlN涂層的微觀組織和性能的影響（英文）[J]. 肖雅,熊計,郭智興,劉俊波,周黎明,葉俊镠,趙武.  Journal of Central South University. 2020(03)
[2]N2流量比對復合磁控濺射Zr-B-N薄膜結構和性能的影響[J]. 王鐵鋼,郭玉垚,唐寬瑜,劉艷梅,林偉,姜肅猛.  表面技術. 2018(11)
[3]熱作模具鋼CrTiAlSiN多元復合涂層的工業制備及性能研究[J]. 董衛萍,柳琪,王進,馬大衍.  模具制造. 2018(01)

博士論文
[1]微弧區間伏安特性對Ti及TiN鍍層結構與性能的影響[D]. 楊超.西安理工大學 2017

碩士論文
[1]DLC/AlTiN復合涂層的制備及摩擦學性能研究[D]. 黃瑞華.燕山大學 2019
[2]熱作模具Cr基復合納米硬質涂層的工業制備及熱穩定性研究[D]. 柳琪.青島理工大學 2018
[3]車架縱梁沖裁工藝改進及數值模擬[D]. 曹耀遠.青島理工大學 2017



本文編號：2994804