【摘要】：采用OM、SEM、XRD等實驗方法,對不同固溶溫度下Fe-22.8Mn-8.48Al-0.86C低密度鋼的組織演變規律和力學性能進行了研究。結果表明,固溶處理對實驗鋼的組織與性能影響較大,實驗鋼晶粒尺寸隨固溶溫度的升高而增大,抗拉強度隨著固溶溫度的升高而降低。在1100℃固溶處理1 h后,實驗鋼具有最佳的強塑性配合,抗拉強度為757.4 MPa,斷后伸長率為68.0%,強塑積可達51.5 GPa·%,計算得出Fe-22.8Mn-8.48Al-0.86C鋼的密度為6.9 g/cm~3。
[Abstract]:The microstructure evolution and mechanical properties of Fe-22.8Mn-8.48Al-0.86C low density steel at different solution temperatures were studied by means of OM,SEM,XRD and other experimental methods. The results show that the effect of solution treatment on the microstructure and properties of the experimental steel is great. The grain size of the experimental steel increases with the increase of the solution temperature, and the tensile strength decreases with the increase of the solution temperature. After solution treatment at 1100 鈩，

本文編號：2262035