【摘要】：將低壓轉子鋼30Cr2Ni4Mo V粗大非平衡組織多次重復高溫加熱、保溫適當時間淬火,分析α相再結晶程度對細化晶粒的影響。結果表明:經910~1000℃單次高溫加熱、淬火后,其晶粒度達5.5~6級;兩次重復高溫加熱910℃×2 h細化效果較好,晶粒度達8級;三次重復高溫加熱910℃×2 h,促進了α相發生完全再結晶,實現晶粒均勻化。
[Abstract]:The coarse non-equilibrium microstructure of 30Cr2Ni4Mo V in low-pressure rotor steel was heated repeatedly at high temperature and quenched for proper time, and the effect of recrystallization degree of 偽 phase on grain refinement was analyzed. The results show that after single high temperature heating at 9101000 鈩，

本文編號：2253332