【摘要】：以AA6016變形鋁合金為研究對象,對其采取了不同的熱處理,得出沖壓成形性能最佳的固溶和時效處理方式,并研究了拉深速度和壓邊力等工藝參數對板料成形性能的影響。結果表明,AA6016鋁合金沖壓成形性能最佳熱處理方式為540℃保溫40 min的固溶處理及160℃預時效10 min處理,可提高其成形極限,改善AA6016鋁合金的成形性能;室溫拉深時當拉深速度為3 mm·min-1,壓邊力大小為1.2 N·mm-2時,拉深成形性能良好,可以得到極限拉深比為1.7,為AA6016鋁合金在汽車車身方面的應用提供了理論依據。
[Abstract]:Taking AA6016 deformed aluminum alloy as the research object, different heat treatment was used to obtain the best solution and aging treatment method for stamping properties, and the effects of drawing speed and blank holder force on sheet metal formability were studied. The results show that the best heat treatment for forming properties of AA-6016 aluminum alloy is solution treatment at 540 鈩，

本文編號：2247631