【摘要】：目的探索磁控濺射制備的Ti-Al-Si-N涂層在不同環境溫度下的摩擦學性能。方法利用磁控濺射技術,在AISI304不銹鋼表面制備了Ti-Al-Si-N涂層,采用掃描電鏡、能譜儀和X射線衍射儀研究了涂層的成分與微觀結構,利用HT-1000型高溫摩擦磨損試驗機,以直徑為5 mm的Al_2O_3球作為摩擦副,研究了Ti-Al-Si-N涂層在室溫、200、400、600℃時的摩擦學性能。結果磁控濺射制得的Ti-Al-Si-N涂層表面平整、致密,具有典型的柱狀晶結構;在室溫、200、400、600℃的環境溫度下,涂層的摩擦系數分別為0.6、0.35、0.25和0.2,磨損體積分別為0.319、0.232、0.0149和0.0136 mm~3。涂層的摩擦系數和磨損體積均隨溫度的升高而降低。結論隨著測試溫度的升高,磨痕區域生成越多的以氧化鈦和氧化鋁為主的氧化物,其具有一定的減摩作用。在室溫下,涂層的磨損機理主要為疲勞剝落,200℃時為磨粒磨損,400℃時為磨粒磨損和氧化磨損,600℃時主要為氧化磨損。
[Abstract]:Aim to investigate the tribological properties of Ti-Al-Si-N coatings prepared by magnetron sputtering at different ambient temperatures. Methods the Ti-Al-Si-N coating was prepared on the surface of AISI304 stainless steel by magnetron sputtering technique. The composition and microstructure of the coating were studied by SEM, EDS and XRD. The high temperature friction and wear tester HT-1000 was used to study the composition and microstructure of the coating. The tribological properties of Ti-Al-Si-N coating at room temperature (200400600 鈩，

本文編號：2211995