【摘要】：制造設備間的廣泛互聯、互操作是制造領域?qū)崿F(xiàn)廣泛物聯的重要前提.對數控系統進行實時監測,收集數控系統加工參數、刀具幾何參數、零件質量檢測等異構數據,進行有效地關聯監控是目前研究的熱點.基于OPC(object linking and embedding for process control)UA(unified architecture)連接數控系統,建立基于MTConnect的"適配器-代理(adapter-agent)"通用數控系統實時監控體系.研究實時監控數據模型、通信框架及其訪問策略,給出了機床加工過程監控數據的標準數據模型.開發的原型系統在某航空薄壁件的實際加工過程進行實時監控,實現了加工過程數據、離線數據的綜合可視化表達,驗證了所提出的數控系統信息集成方法的有效性.該方法構建的數據模型清晰地表達了各加工要素,具有很好的可擴展性.
[Abstract]:The wide interconnection and interoperation of manufacturing equipment is an important prerequisite to realize wide connection in manufacturing field. It is a hot point to collect the heterogeneous data of NC system such as machining parameters, tool geometry parameters, parts quality inspection and so on, and to monitor the NC system effectively. Based on OPC (object linking and embedding for process control) UA (unified architecture) to connect numerical control system, a real-time monitoring system of "adapter-agent (adapter-agent)" based on MTConnect is established. The real-time monitoring data model, communication framework and access strategy are studied, and the standard data model of machine tool process monitoring data is given. The prototype system is used to monitor and control the actual machining process of an aviation thin-walled part in real time. The integrated visual expression of machining process data and off-line data is realized, and the effectiveness of the information integration method of the proposed numerical control system is verified. The data model constructed by this method clearly expresses the processing elements and has good expansibility.
【作者單位】： 東華大學機械工程學院;
【基金】：國家自然科學基金資助項目(51475301)
【分類號】：TG506;TP277

【相似文獻】

相關期刊論文 前7條

1 林鳳濤;黃志剛;;銑刀破損實時監控技術的研究[J];制造技術與機床;2009年03期

2 李鵬飛,張斌,辜志宏,劉慕雙;實時監控裝置在柴油機曲軸磨削中的應用[J];石油機械;2004年10期

3 雷繼榮;陳弘;趙仲宇;;用聲發射(AE)實時監控刀具異常的研究[J];工具技術;1991年12期

4 高磊;紀波;劉風海;范鳳琴;;觸摸屏實時監控實驗鑄件位置的實現和應用[J];鑄造技術;2012年01期

5 李曉光,盧亮,孟波;SUPCON JX-300X DCS在軋鋼廠水處理的應用[J];中國儀器儀表;2003年09期

6 孔金星,岳曉斌;曲面多層殼體粘接精度控制技術研究[J];新技術新工藝;2003年08期

7 孔金星,岳曉斌;曲面多層殼體粘接精度控制技術研究[J];工具技術;2003年06期

相關碩士學位論文 前2條

1 馬豪;軸承磨床聲發射實時監控裝置的研制[D];中國計量大學;2016年

2 胡家琨;基于電弧傳感的機器人CO_2焊接過程實時監控[D];山東大學;2006年

，

本文編號：2205457