【摘要】：以機床結構固有頻率變化范圍可控為目的,提出一種機床參數及其變化范圍的主動設計方法,實現了系統結構參數允許變化范圍的快速計算。首先,將動結合部剛度參數變化以區間數表達,給出了機床結構參數敏感性區間的計算方法以及準確預估固有頻率變化范圍的計算方法;然后,根據預先給定系統期望的振動模態及分布,采用區間數學運算法則將機床參數的主動設計最終歸結為求取目標函數的全局優化問題,確定了系統結構參數的允許變化范圍;最后,通過一個兩軸耦合進給系統驗證了所提出方法的可行性。
[Abstract]:In order to control the change range of natural frequency of machine tool structure, an active design method of machine tool parameters and its variation range is presented, which realizes the rapid calculation of the allowable range of structural parameters of the system. Firstly, the dynamic joint stiffness parameters are expressed by interval number, and the method of calculating the sensitivity interval of machine tool structure parameters and the calculating method of estimating the range of natural frequency change accurately are given. According to the desired vibration modes and distributions of the system, the active design of machine tool parameters is reduced to the global optimization problem of the objective function by interval mathematical algorithm, and the allowable range of structural parameters of the system is determined. Finally, the feasibility of the proposed method is verified by a two-axis coupled feed system.
【作者單位】： 西安交通大學高端制造裝備協同創新中心;
【基金】：國家自然科學基金(51605374)資助項目
【分類號】：TG502.1
，

本文編號：2167360