【摘要】：采用差熱分析(DTA)測定了Fe-C-Ta三元系中Fe-XC-0.1Ta和Fe-XC-0.5Ta 2個垂直截面,并選取Fe-2.93C-0.1Ta和Fe-2.31C-0.5Ta 2種合金,對其相變過程進行了分析。利用CALPHAD方法,并結合實驗數據對該體系的相關系進行了熱力學優化。結果表明,計算結果與實驗結果符合較好。該體系富鐵角的液相面投影存在4個四相恒溫反應:Liquid+bcc?fcc+Ta C,Liquid?bcc+Fe_2Ta+Ta C,Liquid?Fe_3C+Ta C+fcc,Liquid+Ta_2C?Ta C+Fe_2Ta,反應溫度分別為1443.26、1413.90、1122.42及1508.64℃。Fe-XC-0.1Ta合金和Fe-XC-0.5Ta合金在726.6℃發生共析反應。
[Abstract]:Two vertical sections of Fe-XC-0.1Ta and Fe-XC-0.5Ta in Fe-C-Ta ternary system were measured by differential thermal analysis (DTA). Two kinds of alloys, Fe-2.93C-0.1Ta and Fe-2.31C-0.5Ta, were selected to analyze the phase transformation process. The phase relationship of the system was optimized by CALPHAD method and experimental data. The results show that the calculated results are in good agreement with the experimental results. There are four phase isothermal reactions in the liquid surface projection of iron rich angle in this system: 1: liquid bcc?fcc Ta / C liquid / BCC / Ta / C / C / C / C / T / C / C / C\% C\%\
【作者單位】： 湘潭大學材料設計及制備技術湖南省重點實驗室;
【基金】：國家自然科學基金(51471141)
【分類號】：TG142.1

【相似文獻】

相關期刊論文 前10條

1 ，

本文編號：2151873