【摘要】：采用攪拌摩擦焊對2024鋁合金進行焊接試驗,研究了其焊接工藝參數中添加不同環氧樹脂含量的碳化硅粉末、攪拌頭旋轉速度對焊縫成形、宏觀組織、微觀組織和力學性能的影響規律。結果表明:當添加劑為碳化硅+20wt%環氧樹脂時,能夠較好地成形,焊縫硬度較高,具有更佳的性能;同時攪拌摩擦焊攪拌頭的轉速對焊件影響較大,轉速越高時焊縫表面越光滑,"洋蔥瓣"越不明顯,本試驗中當攪拌頭轉速在800 r/min時,碳化硅粉末與母材混合較好,分布均勻。研究結果為改善鋁合金攪拌摩擦焊焊接接頭的力學性能提供了必要的理論依據和試驗依據。
[Abstract]:The welding experiments of 2024 aluminum alloy were carried out by friction stir welding. The effects of rotating speed of stirring head on weld formation and macrostructure of 2024 aluminum alloy were studied by adding silicon carbide powder with different content of epoxy resin into the welding process parameters. The effect of microstructure and mechanical properties. The results show that when the additive is silicon carbide 20wt% epoxy resin, it can be formed well, the hardness of weld is higher and the performance is better, and the rotating speed of friction stir welding head has a great influence on the welding parts. The higher the rotating speed is, the more smooth the weld surface is and the less obvious the "onion flap" is. In this experiment, when the rotating speed of the stirring head is 800 r/min, the sic powder and the base metal are mixed well and the distribution is uniform. The results provide the necessary theoretical and experimental basis for improving the mechanical properties of friction stir welding joint of aluminum alloy.
【作者單位】： 武漢理工大學能源與動力工程學院;
【基金】：武漢理工大學自主創新基金項目(166805005)
【分類號】：TG453.9

【相似文獻】

相關期刊論文 前10條

1 廖紫成;最佳焊接工藝參數的數學模型及其應用[J];焊接技術;1994年01期

2 蔡廣宇;楊家軍;李永久;;弧焊機器人焊接工藝參數設計系統研究[J];組合機床與自動化加工技術;2009年11期

3 孫遇諄;;銅鋁閃光焊接工藝參數探討[J];焊接技術;2011年06期

4 ;單面焊雙面成型操作技術(七)[J];焊接;1984年01期

5 汪建華;顧斯美;陳楚;鐘小敏;逄強;戚新海;;低合金鋼焊接工藝參數選擇計算機輔助系統[J];焊接;1989年10期

6 剛鐵;黃地尚，

本文編號：2136806