本文選題：結晶器結構 + 銅板��； 參考：《特種鑄造及有色合金》2017年03期

【摘要】：為改善特大斷面連鑄方坯熱容量大、傳熱效率低等問題,基于結晶器傳熱學理論分析,提出復合式結晶器新技術。針對此結晶器,在保證銅板正常工作情況下,采用耦合方法,分析銅板、內冷卻器的溫度場及熱應力分布。結果表明,銅板溫度最高為230.8℃,熱應力最大為261 MPa;內冷卻器最高溫度為406℃,應力為399 MPa,對內冷卻器結構材料要求提高。該計算結果及方法可為結晶器銅板設計及工業應用提供參考。
[Abstract]:In order to improve the problems of large heat capacity and low heat transfer efficiency of billet in super large section continuous casting, a new technology of compound mould is put forward based on the theoretical analysis of heat transfer in crystallizer. For this crystallizer, the temperature field and thermal stress distribution of copper plate and inner cooler are analyzed by coupling method in order to ensure the normal operation of copper plate. The results show that the maximum temperature of copper plate is 230.8 鈩，

本文編號：2034300