陶瓷涂層結合質量的超聲斜入射檢測
發布時間:2018-06-10 10:12
本文選題:陶瓷涂層 + 結合質量。 參考:《清華大學學報(自然科學版)》2017年05期
【摘要】:金屬基體表面涂覆的非金屬涂層可以提高基體的耐腐蝕、耐高溫等性能,涂層的結合質量是涂層性能的重要指標。傳統的超聲透射和反射方法可以實現對涂層脫粘的檢測,但是對于非脫粘涂層結合質量的檢測較為困難。該文采用超聲斜入射反射檢測法,對不同結合質量的非金屬涂層進行檢測,利用頻譜分析技術計算得到斜入射非線性系數。檢測結果表明:斜入射非線性系數可以反映非金屬涂層的結合質量,涂層的脫粘情況可以通過基頻的幅值判斷,而在非脫粘情況下,斜入射非線性系數越大,則涂層結合質量越差。
[Abstract]:The non-metallic coating on the surface of metal substrate can improve the corrosion resistance and high temperature resistance of the substrate. The bonding quality of the coating is an important index of the coating performance. The traditional ultrasonic transmission and reflection methods can be used to detect the debonding of the coating, but it is difficult to detect the bonding quality of the non-debonding coating. In this paper, ultrasonic oblique incidence reflection detection method is used to detect nonmetallic coatings with different bonding quality, and the nonlinear coefficient of oblique incidence is calculated by spectrum analysis technique. The test results show that the nonlinear coefficient of oblique incidence can reflect the bonding quality of the non-metallic coating, and the debonding of the coating can be judged by the amplitude of the fundamental frequency, while in the case of non-debonding, the nonlinear coefficient of oblique incidence is greater. Then the coating bonding quality is worse.
【作者單位】: 清華大學先進成形制造教育部重點實驗室摩擦學國家重點實驗室;
【分類號】:TG174.453
【相似文獻】
相關期刊論文 前3條
1 張彥新;牛曉光;張雄亞;張艷亮;;縱波斜入射法在電站部件探傷中的應用[J];無損檢測;2008年02期
2 吳斌;張婧;邱兆國;何存富;;斜入射下粘接界面的反射特性[J];北京工業大學學報;2013年06期
3 ;[J];;年期
,本文編號:2002853
本文鏈接:http://sikaile.net/kejilunwen/jiagonggongyi/2002853.html
最近更新
教材專著