本文選題：坯料 + 鋁箔　； 參考：《輕金屬》2016年09期

【摘要】：利用背散電子衍射(EBSD)研究了1235鋁合金坯料在加工過程中的織構演變。結果表明:6mm厚鑄軋態鋁箔坯料的主要織構為{210}221織構、{221}210織構,并含有少量的{110}001高斯織構;2.55mm厚和0.54mm厚冷軋態坯料的主要織構有{110}001高斯織構和{112}111銅型織構;2.55mm厚的冷軋態坯料經630℃7h均勻化退火后的織構主要是{100}001立方織構;0.54mm厚的冷軋坯料經380℃6h中間退火后的主要織構有{100}001立方織構和{110}001高斯織構。對織構的演變機制進行了深入的探討。
[Abstract]:The texture evolution of 1235 aluminum alloy billet during processing was studied by EBSD. The results show that the main texture of the cast and rolled aluminum foil billet is {210} 221 texture, {221} 210 texture, The main texture of the cold rolled blank containing a small amount of {110} 001 Gao Si thickness and 0.54mm thick cold rolled blank are {110} 001 Gao Si texture and {112} 111 copper shape texture 2.55 mm thick cold rolled blank annealed at 630 鈩，

本文編號：1902390