本文選題：鍛壓機床 + 改性鋁合金��； 參考：《熱加工工藝》2016年23期

【摘要】：泡沫鎂改性鋁合金是一種極具應用前景的鍛壓機床用鋁合金。在鍛造過程中,如何優選變形量和始鍛溫度至關重要。采用不同的鍛壓工藝參數(變形量和始鍛溫度)生產了鍛壓機床改性鋁合金試樣,并進行了顯微組織和力學性能的測試與分析。結果表明,合金的抗拉強度和屈服強度隨鍛造變形量的增加而增加,斷后伸長率則先增大后減小;合金的抗拉強度、屈服強度和斷后伸長率均隨始鍛溫度的提高而先增大后減小。鍛壓機床改性鋁合金的變形量優選為15%、始鍛溫度優選為450℃。
[Abstract]:Magnesium foam modified aluminum alloy is a kind of aluminum alloy used in forging machine tools. In the process of forging, how to select the deformation quantity and the starting forging temperature is very important. The aluminum alloy samples modified by forging machine tools were produced with different forging process parameters (deformation and starting forging temperature). The microstructure and mechanical properties of the samples were tested and analyzed. The results show that the tensile strength and yield strength of the alloy increase with the increase of forging deformation, but the elongation increases first and then decreases. The yield strength and elongation after break increase first and then decrease with the increase of starting forging temperature. The deformation of aluminum alloy modified by forging machine is 15 鈩，

本文編號：1899746