本文選題：液壓機 + 液壓系統　； 參考：《合肥工業大學》2017年碩士論文

【摘要】：液壓系統因為其本身的各種優良特性,自從應用以來,逐漸成為工業生產和人民日常生活中的重要基礎組成部分,在各個行業都有著廣泛的應用。以液壓系統為核心的液壓機也因為其負載能力大的特性,成為工業生產制造中重要的基礎設施之一,而液壓機能耗高和能量利用效率低的缺點逐漸成為人們關注的焦點之一,另外隨著“綠色制造”和“低碳制造”的興起,液壓機的能耗也有了更高的要求。本文從多機控制的角度,探討液壓機的新的節能控制方法。首先分析液壓機能耗在時間域上的變化情況和在空間域上的分布狀況,建立液壓機成形過程量化方程和液壓機零部件效能分析模型,明確液壓機的能量損失來源。其次,在能量損失的分析基礎上,提出多機節能控制方法,解決導致液壓機能耗較大的問題,提高液壓機的能效。同時,建立多機節能控制方法下液壓機的能耗模型和工作效率模型,從而衡量液壓機在能耗和效率方面的表現。為了實施多機節能控制,提出驅動控制約束條件,并在約束下,給出“不重疊”控制策略和“壓制區連續”控制策略,并分別建立相應的控制模型。另外,針對多個不同的策略選擇問題,給出統一的評價體系,并以提出的兩個控制策略為例進行研究。以某公司HY-Y30-16型液壓機作為實驗對象,分別獲取其時間域上的能耗分布和其他工藝參數,以各個控制策略模型為計算基礎,分別給出不同策略下的控制邏輯,并比較相對應策略的能耗和工作效率表現,證明了多機節能控制方法的節能效果和不同策略的適用場景,為方法的實際應用給出指導。
[Abstract]:Since its application, hydraulic system has become an important basic part of industrial production and people's daily life, and has been widely used in various industries.Hydraulic press with hydraulic system as its core has become one of the important infrastructure in industrial production because of its high load capacity, and the shortcomings of high energy consumption and low energy utilization efficiency of hydraulic press have gradually become one of the focuses of attention.In addition, with the rise of "green manufacturing" and "low-carbon manufacturing", the energy consumption of hydraulic press also has higher requirements.This paper discusses the new energy-saving control method of hydraulic press from the point of view of multi-machine control.Firstly, the variation of energy consumption in time domain and the distribution in space are analyzed, and the quantitative equation of forming process of hydraulic press and the efficiency analysis model of hydraulic press parts are established to determine the source of energy loss of hydraulic press.Secondly, on the basis of the analysis of energy loss, the energy saving control method of multi-machine is put forward to solve the problem that leads to the large energy consumption of hydraulic press, and to improve the energy efficiency of hydraulic press.At the same time, the energy consumption model and working efficiency model of hydraulic press under multi-machine energy-saving control method are established to measure the performance of hydraulic press in energy consumption and efficiency.In order to implement multi-machine energy-saving control, the constraint conditions of drive control are put forward. Under the constraints, the control strategies of "no overlap" and "continuous control in the suppression zone" are given, and the corresponding control models are established respectively.In addition, a unified evaluation system is given for many different strategy selection problems, and two control strategies are studied as an example.Taking the HY-Y30-16 hydraulic press of a certain company as the experimental object, the energy consumption distribution and other process parameters in the time domain are obtained, and the control logic under different strategies is given based on each control strategy model.By comparing the energy consumption and working efficiency of the corresponding strategy, the energy-saving effect of the multi-machine energy-saving control method and the applicable scenarios of different strategies are proved, which provides guidance for the practical application of the method.
【學位授予單位】：合肥工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TG305

【參考文獻】

相關期刊論文 前6條

1 韓芳;;波動載荷下工程機械液壓底盤性能及實驗技術研究[J];企業技術開發;2015年01期

2 金智林;郭立書;施瑞康;趙又群;施正堂;;汽車電控液壓制動系統動態性能分析及試驗研究[J];機械工程學報;2012年12期

3 林瀟;管成;裴磊;潘雙夏;;混合動力液壓挖掘機動臂勢能回收系統[J];農業機械學報;2009年04期

4 國香恩,趙丁選,尚濤,張紅彥;模糊控制在液壓挖掘機節能中的應用[J];吉林大學學報(工學版);2004年02期

5 張利平,周蘭午,劉芬,王儒慧;定量泵液壓系統節能方法研究[J];中國機械工程;2001年S1期

6 高峰,高宇,馮培恩;挖掘機載荷自適應節能控制策略[J];同濟大學學報(自然科學版);2001年09期

，

本文編號：1756939