本文選題：遠程調壓　切入點：先導溢流閥　出處：《液壓與氣動》2016年10期

【摘要】：針對半無頭軋制卷取機下夾送輥液壓閥臺不能快速泄壓的問題進行了閥臺的調定。在調定中,根據先導減壓閥與先導溢流閥的壓力變化情況,最終確定了問題的原因在于先導溢流閥中先導油的供排方式不合理。找出了同一套遠程調壓系統共同控制先導減壓閥的減壓與先導溢流閥溢流的優缺點。通過深入分析液壓閥的結構與調壓原理,可更好地根據調試時液壓回路中各點的壓力變化分析解決液壓系統中存在問題。
[Abstract]:Aiming at the problem that the hydraulic valve table of the clamping roller under the semi-headless rolling coiler can not release the pressure quickly, the adjustment of the valve table is carried out.According to the pressure variation of the pilot relief valve and the pilot relief valve, the reason of the problem is the unreasonable supply and discharge mode of the pilot oil in the pilot relief valve.The advantages and disadvantages of the pressure-relief and pilot relief valve relief controlled by the same remote pressure regulating system are found out.By deeply analyzing the structure of hydraulic valve and the principle of pressure regulation, the existing problems in hydraulic system can be better solved according to the pressure variation of every point in hydraulic circuit during debugging.
【作者單位】： 河鋼集團唐鋼公司熱軋部;河鋼集團唐鋼公司煉鐵部;
【分類號】：TG333.24
，

本文編號：1727400