發布時間：2018-03-29 19:13

  本文選題：硬質合金　切入點：切削力　出處：《機械科學與技術》2017年04期

【摘要】：研究了激光加熱與超聲橢圓振動復合切削條件下,使用CBN(立方氮化硼)刀具對硬質合金材料進行精密加工的切削特性。利用有限元仿真,分析硬質合金材料在普通切削、一維超聲振動切削、超聲橢圓振動切削與激光超聲復合切削4種切削方式下的切削力變化特征。采用超精密車床與YAG激光器、自主研發的超聲振動裝置等輔助設備,實驗研究了激光超聲復合精密加工硬質合金的切削特性。通過一系列的對比實驗,分析切削參數,如切削速度、切削厚度,對切削力的影響規律。仿真與實驗結果表明,由于加工材料的軟化和斷續切削,激光超聲復合輔助加工顯著地降低了切削力,硬質合金的切削加工性能得到顯著改善,通過工藝參數的優化,可以實現硬質合金的精密加工。
[Abstract]:In this paper, the cutting characteristics of CBN (cubic boron nitride) cutting tool for the precision machining of cemented carbide material under the condition of laser heating and ultrasonic elliptic vibration composite cutting are studied. The finite element simulation is used to analyze the cemented carbide material in common cutting. The cutting force variation characteristics of one dimensional ultrasonic vibration cutting, ultrasonic elliptical vibration cutting and laser ultrasonic combined cutting are adopted. The auxiliary equipments such as ultra-precision lathe and YAG laser, ultrasonic vibration device developed by ourselves are adopted. The cutting characteristics of laser ultrasonic composite precision machining cemented carbide are studied experimentally. Through a series of comparative experiments, the influence of cutting parameters, such as cutting speed, cutting thickness and cutting force, on the cutting force is analyzed. The simulation and experimental results show that, Due to the softening and intermittent cutting of the machining material, the cutting force is significantly reduced and the cutting performance of the cemented carbide is greatly improved by laser combined ultrasonic assisted machining. The precision machining of the cemented carbide can be realized by optimizing the process parameters.
【作者單位】： 河南理工大學機械與動力工程學院;
【基金】：國家自然科學基金項目(51075127)資助
【分類號】：TG666

【相似文獻】

相關期刊論文 前6條

1 劉旺玉,明冬蘭,曾志新,張發英;微鋸—拉屑復合切削方法制造金屬長纖維的強度分析[J];工具技術;2002年03期

2 盧山;復合切削油的應用[J];潤滑與密封;1984年06期

3 李成遙;何云;李林寧;倪昊;劉敏;;車梳復合切削特性試驗研究[J];硬質合金;2013年03期

4 鄭澤鈿;陳銀清;;碗型發熱盤曲面精加工工藝優化——5刀聯動復合切削裝置設計[J];制造技術與機床;2010年11期

5 張平亮;;先進CNC復合加工刀具和復合切削技術[J];機床與液壓;2012年16期

6 ;[J];;年期

相關碩士學位論文 前2條

1 祝孟琪;弱剛度零件車銑切削加工研究[D];大連理工大學;2015年

2 李成遙;車梳復合切削特性及試驗研究[D];華東理工大學;2013年

，

本文編號：1682467