本文選題：空間填充曲線　切入點：T樣條曲面　出處：《中國機械工程》2017年23期 　論文類型：期刊論文

【摘要】：針對空間填充曲線法的網格只具有正則矩形,生成的刀具路徑存在頻繁轉向、長度冗長、生成時間長等缺點,提出一種基于空間填充法的刀具路徑生成算法。選用T樣條曲面為造型曲面,生成具有非正則矩形的網格并進行回路的規劃;用改進的Hamiltonian算法初步生成刀具路徑;用改進的倒圓角算法進行拐角優化,獲得最終的刀具路徑。開發出了基于該算法的仿真系統,對算法進行了仿真驗證和實際的加工實驗,結果表明所提出算法有效可行,生成的刀具路徑長度及生成時間都得到縮短。
[Abstract]:The grid of space filling curve method only has regular rectangle, and the generated tool path has the disadvantages of frequent turning, long length, long generation time and so on. This paper presents a tool path generation algorithm based on space filling method. Using T-spline surface as modeling surface, the mesh with irregular rectangle is generated and loop planning is carried out, and the tool path is preliminarily generated by improved Hamiltonian algorithm. Finally, a simulation system based on this algorithm is developed. The simulation results show that the proposed algorithm is effective and feasible. The tool path length and generation time are shortened.
【作者單位】： 哈爾濱理工大學機械動力工程學院;
【基金】：哈爾濱市科技創新人才研究專項基金優秀學科帶頭人項目(2013RFXXJ064)
【分類號】：TG71

【相似文獻】

相關期刊論文 前10條

1 爨瑩,，

本文編號：1614867