本文選題：鋼軌　切入點：正火工藝　出處：《熱加工工藝》2016年19期 　論文類型：期刊論文

【摘要】：針對60 kg/m U75VG鋼軌焊后正火如何最大限度地獲得細化晶粒效果問題,選擇了加熱氣體流量、加熱時間和冷卻速度三因素,按照三因素三水平的正火正交試驗設計方案,開展了正火工藝試驗研究。結果表明:采用最佳的焊后正火工藝,對閃光焊接頭進行焊后正火熱處理,能使接頭晶粒明顯細化(晶粒度達到9級左右),沖擊韌性明顯提高,提高了鋼軌焊接接頭的強韌性。
[Abstract]:In order to solve the problem of how to obtain the maximum grain refinement effect by normalizing 60 kg/m U75VG rail after welding, three factors of heating gas flow rate, heating time and cooling rate are selected, and the design scheme of normalizing orthogonal test is based on three factors and three levels. The experimental study on normalizing process has been carried out. The results show that the grain size of the joint can be obviously refined (the grain size of the joint is about 9 grade and the impact toughness is obviously improved by adopting the best post-welding normalizing process and normalizing heat treatment after welding on the flash welding joint). The strength and toughness of rail welded joints are improved.
【作者單位】： 西南交通大學材料科學與工程學院焊接研究所;
【分類號】：U213.92;TG441.8
，

本文編號：1601945