發布時間：2018-02-26 00:35

  本文關鍵詞： 漸進成形 刀具軌跡優化 增量步長 表面質量 波紋度　出處：《合肥工業大學學報(自然科學版)》2017年03期 　論文類型：期刊論文

【摘要】：文章針對變角度緩面零件加工表面波紋不均勻、成形尺寸精度差的問題,提出了一種基于增量角度Δθ來控制增量步長Δz的方法,建立了Δz與Δθ之間的數學方程,并利用Matlab軟件求解出給定Δθ時的增量步長Δz,并將該方法成功應用于變角度緩面零件成形。試驗對比結果表明:該方法改善了變角度緩面零件的表面波紋,減小了底部圓形區域大小,能提高成形效率,提高變角度緩面零件的使用性能。
[Abstract]:In this paper, aiming at the problem of uneven surface ripple and poor dimensional precision of variable angle slow surface parts, a method of controlling increment step size 螖 z based on increment angle 螖 胃 is put forward, and the mathematical equation between 螖 z and 螖 胃 is established. The increment step 螖 z for a given 螖 胃 is solved by using Matlab software, and the method is successfully applied to the forming of a variable angle slow surface part. The experimental results show that the method improves the surface ripple of a variable angle slow surface part. By reducing the size of the bottom circular area, the forming efficiency can be improved and the performance of the parts with variable angle and slow surface can be improved.
【作者單位】： 合肥工業大學機械工程學院;
【基金】：合肥工業大學產學研校企合作資助項目(W2014JSFW0263)
【分類號】：TG306
，

本文編號：1535838