本文關鍵詞： 熱軋模型 溫度模型 APFC模型 自學習控制　出處：《金屬材料與冶金工程》2016年06期 　論文類型：期刊論文

【摘要】：1810生產線在減薄時,經常出現軋制狀態不穩定,頭部無法正常咬入,軋制速度不匹配,精軋的活套控制精度不高,精軋出口溫度和卷取溫度不良,板型不良等原因?qū)е聹p薄無法進行。通過優化軋鋼數學模型參數,提升對熱軋模型和溫度控制模型的預報水平和系統適應性,有效提高軋鋼系統對薄規格產品軋制的穩定性和成材率以及自動化控制精度。使薄規格產品(厚度1.6 mm至1.0 mm)能夠穩定軋制,進而擴大新品種的開發。
[Abstract]:The 1810 production line in thinning, often rolling state is not stable, the head can not be normal bite, rolling speed does not match the looper control precision finishing is not high, the export of finishing temperature and coiling temperature, plate and other causes adverse thinning can not be carried out. By optimizing the parameters of steel rolling mathematical model, to enhance adaptive prediction level and system of hot rolling model and temperature control model, effectively improve the system stability of rolling rolling thin products and finished product rate and automation control precision. The thin products (thickness of 1.6 mm to 1 mm) can stabilize the rolling, and then expand the development of new varieties.

【作者單位】： 河鋼集團唐鋼公司;
【分類號】：TG335.11
，

本文編號：1529050