本文關鍵詞： 單點漸進成形 刀具軌跡優化 數值模擬 板厚變化 成形精度 增量角度　出處：《塑性工程學報》2017年03期 　論文類型：期刊論文

【摘要】：利用有限元軟件ANSYS/workbench,以平緩曲面零件為例,模擬零件單點漸進成過程,研究了優化方法中增量角度Δθ對零件厚度、成形精度、等效應變等方面的影響,并與傳統固定增量步長方法進行對比。結果表明:加工層數相同時,優化方法更有助于提高板厚,且零件壁厚隨著增量角度Δθ的增加而增加;優化方法較明顯的提高了零件底部成形精度,無論增量角度Δθ取值多少,零件底部都能充分成形,與實驗結果相吻合;加工層數相同時,在相同區域優化方法導致的板料等效應變大于固定增量步長成形方法,Δθ越小應變?cè)骄鶆?但兩種方法最終的等效應變趨于一致。
[Abstract]:By using the finite element software ANSYS / workbench, the effects of incremental angle 螖 胃 on the thickness, forming accuracy and equivalent strain of the part are studied by simulating the process of single point progressive forming of the flat curved surface part, taking the flat curved surface part as an example, and studying the effect of increment angle 螖 胃 on the thickness, forming accuracy and equivalent strain of the part. The results show that when the number of machining layers is the same, the optimization method is more helpful to increase the thickness of the plate, and the wall thickness of the part increases with the increment of the increment angle 螖 胃. The optimization method obviously improves the forming accuracy of the bottom of the part. No matter how much the increment angle 螖 胃 is, the bottom of the part can be fully formed, which coincides with the experimental results, and when the number of machining layers is the same, In the same region optimization method, the equivalent strain of sheet metal is larger than that of the fixed increment step forming method. The smaller the strain 螖 胃 is, the more uniform the strain is, but the final equivalent strain of the two methods tends to be the same.
【作者單位】： 合肥工業大學機械工程學院;
【分類號】：TG306

【相似文獻】

相關期刊論文 前1條

1 鞏巖;趙磊;;單點金剛石機床及其在光學工程領域的應用[J];中國光學;2011年06期

相關碩士學位論文 前1條

1 曹捚匯;單點漸進成形過程中成形缺陷的數值模擬研究[D];吉林大學;2010年

，

本文編號：1527165