本文關鍵詞： AZ鎂合金 攪拌摩擦點焊 熱電偶 數值模擬　出處：《熱加工工藝》2017年01期 　論文類型：期刊論文

【摘要】：以AZ31鎂合金攪拌摩擦點焊過程為研究對象,分析攪拌頭不同轉速和壓入速度對焊接過程溫度場的影響。溫度場的測定主要通過將兩個熱電偶分別植入攪拌頭軸肩和攪拌針頂端。試驗結果表明,攪拌頭最高溫度隨轉速增加而增加,所得最高溫度為532.530℃,最高升溫速率為93.974℃/s,而同一轉速下壓入速度對最高溫度沒有影響。使用Deform-3D軟件進行AZ31鎂合金攪拌摩擦點焊過程溫度場數值模擬分析,數值模擬結果與試驗結果基本吻合。
[Abstract]:The friction stir spot welding process of AZ31 magnesium alloy was studied. The effect of different rotating speed and impinging speed on the temperature field of the welding process is analyzed. The temperature field is mainly measured by inserting two thermocouples into the shaft shoulder of the mixing head and the top of the needle respectively. The test results show that. The maximum temperature of agitator increases with the increase of rotating speed, the maximum temperature is 532.530 鈩，

本文編號：1466663