發布時間：2018-01-18 11:32

  本文關鍵詞：大型機床床身鑄造工藝的優化設計　出處：《熱加工工藝》2017年17期 　論文類型：期刊論文

  更多相關文章： 機床床身 Any Casting 模擬仿真 澆注系統

【摘要】：以某大型機床床身為研究對象,在對鑄件結構充分分析的基礎上,設計了底注式多內澆道澆注系統和均布頂冒口鑄造工藝。通過Any Casting軟件完成鑄件成型過程的模擬仿真,以模擬結果為依據,對原工藝的澆注系統、冒口、冷鐵進行了優化,并確定出澆注溫度1320℃,澆注速度1.2 m/s為最佳工藝參數。使用優化后工藝及參數得到的鑄件質量理想,鑄件質量達到驗收標準。
[Abstract]:Taking the bed of a large machine tool as the research object, the structure of castings is fully analyzed. The casting process of the casting process was simulated by Any Casting software, and the simulation results were based on the simulation results. The gating system, riser and cold iron of the original process were optimized, and the pouring temperature was determined to 1320 鈩，

本文編號：1440761