本文關鍵詞：基于多體系統運動學的龍門銑床加工精度預測模型　出處：《機床與液壓》2016年21期 　論文類型：期刊論文

  更多相關文章： 多體系統運動學 誤差建模 精度預測 誤差補償

【摘要】：五軸聯動數控加工運動復雜,影響零件加工精度的誤差因素很多,綜合考慮多種誤差因素,分析了各級工藝鏈系統的綜合誤差,提出了基于多體系統運動學理論建立工藝系統綜合誤差模型;在零件加工之前對零件的加工精度進行預測;通過切削試加工驗證模型的可靠性。切削試加工實驗證實了基于多體系統運動學的數學模型對零件加工精度預測的準確性和有效性,為今后進一步的研究及誤差補償提供了依據。
[Abstract]:There are many error factors that affect the machining accuracy of parts because of the complex movement of five-axis linkage NC machining. Considering various error factors synthetically, the comprehensive error of all levels of process chain system is analyzed. Based on the kinematics theory of multi-body system, the synthetic error model of process system is established. The machining accuracy of the parts is predicted before the parts are processed. The accuracy and validity of the mathematical model based on the kinematics of multi-body system to predict the machining accuracy of the parts are verified by the cutting trial machining experiments. It provides the basis for further research and error compensation.
【作者單位】： 四川大學空天科學與工程學院;成都飛機工業(集團)有限公司;
【基金】：中航工業產學研專項項目(cxy2013CD36)
【分類號】：TG659
【正文快照】： 0前言傳統的零件數控加工制造過程中,由于數控機床的使用年限增加而導致的加工精度下降,機床磨損、受載荷變形、工況條件變化等各種誤差因素使得加工過程中刀具路線偏離給定進程,這些都給零件造成加工誤差。傳統加工制造中,一般都是通過試切來確保加工工藝能夠保證零件加工精，

本文編號：1415659