【摘要】：介紹了某合成橡膠廢水預處理工程的調試過程,表明采用氣能絮凝裝置去除合成橡膠廢水中的聚羧酸鹽和膠粒在技術上是可行的,正常運行時出水聚羧酸鹽≤2 mg/L,SS≤25 mg/L。陽離子PAM的投加是氣能絮凝工藝的關鍵,設計時應充分考慮廢水易起泡、浮渣過干而難運送的現實問題。通過改變混凝劑種類和PAM加藥點,可以進一步優化氣能絮凝裝置的處理效果。
[Abstract]:The commissioning process of a synthetic rubber wastewater pretreatment project is introduced. It is shown that it is technically feasible to remove polycarboxylate and rubber particles from synthetic rubber wastewater by using gas energy flocculation device, and the effluent polycarboxylate is less than 2 mg/L, in normal operation. SS 鈮，

本文編號：2407388