【摘要】：為了從不銹鋼粉塵中回收利用Fe,Cr和Ni等,對不銹鋼粉塵熱壓塊制備及其自還原過程進行了研究.在熱壓溫度為200℃,熱壓壓力為35 MPa條件下,抗壓強度達到900 N/個以上.高溫條件下,煤熱解產生的揮發分可參與不銹鋼粉塵還原反應,當還原溫度為1 400,1 450℃時,揮發分還原作用率達到0.4.據XRD分析和熱力學計算,自還原過程中含鉻物質的物相轉變順序為Fe Cr2O4,Cr2O3,Cr7C3,[Cr]Fe-Cr-Ni-C.當還原溫度為1 450℃,煙煤中固定碳與粉塵中可去除氧的物質量的比(xc/xo)為0.72時,不銹鋼粉塵熱壓塊不能完全還原;當xc/xo大于0.8,還原20 min時,不銹鋼粉塵熱壓塊能完全還原.
[Abstract]:In order to recover Fe Cr and Ni from stainless steel dust, the preparation and self reduction process of hot pressing blocks of stainless steel dust were studied. When the hot pressing temperature is 200 鈩，

本文編號：2184678