【摘要】：在內徑為600 mm的不銹鋼塔內,以空氣-水-氧氣為物系,對固旋閥塔板的流體力學和傳質性能進行研究。測定了塔板傳質效率和霧沫夾帶量,并與F1浮閥塔板進行對比;通過計算流體力學軟件Fluent對固旋閥塔板上氣相三維流場進行了數值模擬。實驗結果表明:當液相噴淋密度L=5 m~3/(m~2·h)時,隨著氣體負荷的逐漸增大,固旋閥塔板的傳質效率從小于F1浮閥到逐漸接近F1浮閥,且在實驗最大氣體負荷條件下超過了F1浮閥;當液相噴淋密度較大時,固旋閥塔板的傳質效率高于F1浮閥塔板,且隨著氣體負荷的增大,差異越來越明顯;固旋閥塔板的霧沫夾帶比F1浮閥塔板低50%—60%,因此具有更高的氣相負荷操作上限。Fluent軟件模擬結果表明,固旋閥塔板中旋轉流場的存在促使液層分布更均勻,氣液傳質得到進一步強化。
[Abstract]:In a stainless steel tower with an inner diameter of 600 mm, the hydrodynamics and mass transfer performance of the solid rotating valve tray were studied by using air-water-oxygen as the system. The mass transfer efficiency and foam entrainment of the tray were measured and compared with those of the F1 floating valve tray, and the three-dimensional flow field of the gas phase on the solid rotating valve tray was simulated by the computational fluid dynamics software Fluent. The experimental results show that when the liquid spray density is L 鈮，

本文編號：2514250