電子陶瓷材料鈦酸鋇的制備與性能研究
發布時間:2018-12-11 13:38
【摘要】:采用固相反應法制備電子工業用BaZr_xTi_(1-x)O_3材料,研究不同燒結溫度和時間的物相組成、顯微組織形貌和介電性能。結果表明,隨著燒結溫度的升高,BaZr_xTi_(1-x)O_3中的物相組成沒有明顯變化,但結構由四方體變?yōu)榱⒎襟w;當燒結溫度從1 250℃升高至1 350℃時,材料的平均晶粒尺寸從29μm增加至39μm;當晶粒尺寸較小時,材料主要形成90°疇和180°疇,增加晶粒尺寸,材料主要形成180°疇。
[Abstract]:BaZr_xTi_ (1-x) O _ 3 materials for electronic industry were prepared by solid state reaction method. The phase composition, microstructure and dielectric properties of BaZr_xTi_ (1-x) O _ 3 were studied at different sintering temperature and time. The results show that the phase composition of BaZr_xTi_ (1-x) O _ 3 does not change obviously with the increase of sintering temperature, but the structure changes from tetragonal to cubic. When the sintering temperature was raised from 1 250 鈩,
本文編號:2372644
[Abstract]:BaZr_xTi_ (1-x) O _ 3 materials for electronic industry were prepared by solid state reaction method. The phase composition, microstructure and dielectric properties of BaZr_xTi_ (1-x) O _ 3 were studied at different sintering temperature and time. The results show that the phase composition of BaZr_xTi_ (1-x) O _ 3 does not change obviously with the increase of sintering temperature, but the structure changes from tetragonal to cubic. When the sintering temperature was raised from 1 250 鈩,
本文編號:2372644
本文鏈接:http://sikaile.net/kejilunwen/huagong/2372644.html
最近更新
教材專著