【摘要】：為解決蒸壓加氣混凝土抗壓強度檢測周期長、檢測過程繁瑣的問題,研究了一種推定抗壓強度的快速方法。首先,經過大量試驗得到了不同含水率的實測抗壓強度與含水率為8%~12%的蒸壓加氣混凝土抗壓強度之間的換算系數;然后,將所測樣品破碎并全部通過19.0 mm方孔篩,混合均勻后用四分法稱取100 g,置于(105±5)℃干燥箱中干燥1 h,快速測試含水率;最后,結合換算系數與實測抗壓強度換算含水率為8%~12%的抗壓強度。
[Abstract]:In order to solve the problem of long period and tedious detection process of compressive strength of autoclaved aerated concrete, a fast method of estimating compressive strength is studied. Firstly, the conversion coefficient between the measured compressive strength of different moisture content and the compressive strength of autoclaved aerated concrete with 8% moisture content is obtained by a large number of tests. Then, the samples were crushed and passed through the 19.0 mm square sieve. After mixing, 100g was weighed and dried in (105 鹵5) 鈩，

本文編號：2335060